描述
ABB CI930F 3BDH001010R0005产品详情
一、基本信息
品牌:ABB(全球工业自动化与电力技术领导者,专注于数字化、能源管理与智能制造领域)
型号:CI930F(产品编号:3BDH001010R0005)
类型:模拟量输入模块(Analog Input Module),属于ABB AC 800M控制器系列(用于ABB 800xA DCS或自动化系统)
用途:作为工业自动化系统的核心I/O组件,用于采集现场传感器(如温度、压力、流量等)的模拟信号(电压、电流、热电阻RTD、热电偶TC),并将信号转换为数字信号传输至控制器,实现过程监控与控制。
二、技术规格
1.模块功能与通道
输入通道:
8通道单端输入(支持电压、电流、热电阻RTD、热电偶TC信号,通过配置选择)。
信号类型支持:
电压输入:0~5V、1~5V、0~10V(可选)。
电流输入:0~20mA、4~20mA(典型工业信号)。
热电阻RTD:PT100、PT1000、Ni100等。
热电偶TC:K型、J型、T型、E型等。
通道隔离:
通道间隔离电压≥500VAC,模块间隔离电压≥1500VAC(有效防止信号干扰与地电位差问题)。
2.精度与性能
测量精度:
电压/电流输入:±0.05%(典型值),温度输入(RTD/TC):±0.1℃(高精度设计,满足工业测量需求)。
分辨率:16位ADC(模拟输入),确保微小信号变化可被准确捕捉。
响应时间:≤100ms(典型值),支持快速过程控制。
3.信号处理与诊断
冷端补偿(CJC):内置热电偶冷端补偿功能,自动修正环境温度对测量的影响。
断线检测:支持输入信号断线检测(如热电偶开路、电流信号低于阈值),触发报警并输出至控制器。
自诊断功能:模块内部实时监测硬件状态(如电源、通道故障),通过LED指示灯或控制器报警。
4.电源与通信
电源要求:
模块供电:24VDC(±10%),功耗≤5W(低功耗设计,减少发热)。
通信接口:
通过ABB的Controller Link或PROFIBUS DP总线与AC 800M控制器通信,数据传输速率≥12Mbps。
支持冗余通信总线(可选),提高系统可靠性。

CI930F 3BDH001010R0005

CI930F 3BDH001010R0005
ABB CI930F 3BDH001010R0005 Product Details
I.Basic Information
Brand:ABB(global leader in industrial automation and power technology,focusing on digitalization,energy management and intelligent manufacturing)
Model:CI930F(Product No.:3BDH001010R0005)
Type:Analog Input Module,belonging to the ABB AC 800M controller series(for ABB 800xA DCS or automation system)
Purpose:As the core I/O component of the industrial automation system,it is used to collect analog signals(voltage,current,thermal resistor RTD,thermocouple TC)from field sensors(such as temperature,pressure,flow,etc.),and convert the signals into digital signals and transmit them to the controller to achieve process monitoring and control.
II.Technical Specifications
1.Module Function and Channel
Input Channel:
8-channel single-ended input(supports voltage,current,thermal resistor RTD,thermocouple TC signals,selected through configuration).
Signal type support:
Voltage input:0~5V,1~5V,0~10V(optional).
Current input:0~20mA,4~20mA(typical industrial signal).
Thermocouple RTD:PT100,PT1000,Ni100,etc.
Thermocouple TC:K type,J type,T type,E type,etc.
Channel isolation:
Isolation voltage between channels≥500VAC,isolation voltage between modules≥1500VAC(effectively prevent signal interference and ground potential difference problems).
2.Accuracy and performance
Measurement accuracy:
Voltage/current input:±0.05%(typical value),temperature input(RTD/TC):±0.1℃(high-precision design to meet industrial measurement needs).
Resolution:16-bit ADC(analog input)to ensure that small signal changes can be accurately captured.
Response time:≤100ms(typical value),supports fast process control.
3.Signal processing and diagnosis
Cold junction compensation(CJC):Built-in thermocouple cold junction compensation function,automatically corrects the impact of ambient temperature on measurement.
Wire break detection:Supports input signal wire break detection(such as thermocouple open circuit,current signal below threshold),triggers alarm and outputs to the controller.
Self-diagnosis function:The module monitors the hardware status(such as power supply,channel failure)in real time,and alarms through LED indicators or controllers.
4.Power supply and communication
Power supply requirements:
Module power supply:24VDC(±10%),power consumption≤5W(low power design,reduce heat).
Communication interface:
Communicate with AC 800M controller through ABB’s Controller Link or PROFIBUS DP bus,data transmission rate≥12Mbps.
Support redundant communication bus(optional)to improve system reliability.