描述
ABB NDSM05是一款应用于工业自动化领域的数字模块，根据具体型号的不同，可分为数字输入模块和数字输出模块，以下是其详细信息：
NDSM05数字输出模块
基本信息：型号为NDSM05，产品类型为数字输出模块，产地为瑞典。其尺寸为100mm×80mm×25mm，重量约为0.28kg，采用35mm标准导轨安装方式。
技术参数：工作电压为24VDC，电压范围为18-30VDC，功耗≤6W。具有16个独立的离散输出通道，通道间相互隔离，与背板的隔离电压为2.5kVAC，每个通道的最大电流为1A，模块总电流≤8A。开关导通时间≤1ms，关断时间≤0.5ms，支持100,000次以上的开关周期。可适应-40℃至+70℃的工作温度范围，湿度为5%-95%（非冷凝），防护等级为IP20。
产品特点：每个输出通道都具有过流保护功能，故障消除后可自动恢复，同时模块还具备ESD保护功能，符合IEC 61000-4-2标准，接触放电±8kV。每个通道都配备了LED指示灯，用于直观显示通道状态，模块级故障LED（电源、通信）和输出线路的开路检测功能，可通过系统总线将故障信息传输到控制器，便于远程故障排除。
NDSM05数字输入模块
基本信息：产地为瑞典，重量约为0.28kg，尺寸为3.5cm×31.3cm×17.6cm。
技术参数：工作电压一般为24VDC。输入通道数量有8通道和16通道等不同配置。信号处理速度快，响应时间≤2ms。通信接口为RS-485 Modbus RTU。工作温度范围为-20℃至+70℃，湿度为0%-95%RH（非冷凝），防护等级为IP20。
产品特点：每个通道支持最大24VDC的输入，与工业环境中常用的各种传感器和执行器兼容。具有超快的响应时间，可确保立即准确地处理数据，显著提高运营效率并减少停机时间。模块化设计便于在面板上轻松安装，减少了设置时间，并且便于在不中断生产过程的情况下进行快速维护或升级。
The ABB NDSM05 is a digital module used in industrial automation.Depending on the specific model,it can be divided into digital input modules and digital output modules.Below are its detailed specifications:
NDSM05 Digital Output Module
Basic Information:Model:NDSM05;Product Type:Digital Output Module;Origin:Sweden.Dimensions:100mm×80mm×25mm;Weight:Approximately 0.28kg;Mounts via a 35mm standard DIN rail.
Technical Specifications:Operating voltage:24VDC;Voltage range:18-30VDC;Power consumption:≤6W.Features 16 independent discrete output channels,isolated from each other,with a backplane isolation voltage of 2.5kVAC.Maximum current per channel:1A;Total module current:≤8A.Switching on time:≤1ms;Turn-off time:≤0.5ms;Supports over 100,000 switching cycles.Operating temperature range:-40℃to+70℃;humidity:5%-95%(non-condensing);protection rating:IP20.
Product Features:Each output channel has overcurrent protection and automatically recovers after fault clearance.The module also features ESD protection,conforming to IEC 61000-4-2 standard,with contact discharge±8kV.Each channel is equipped with LED indicators for visual display of channel status,module-level fault LEDs(power,communication)and open-circuit detection of output lines.Fault information can be transmitted to the controller via the system bus for remote troubleshooting.
NDSM05 Digital Input Module
Basic Information:Made in Sweden;weight approximately 0.28kg;dimensions 3.5cm×31.3cm×17.6cm.
Technical Parameters:Operating voltage is typically 24VDC.Available in 8-channel and 16-channel configurations.Fast signal processing speed;response time≤2ms.The communication interface is RS-485 Modbus RTU.Operating temperature range is-20℃to+70℃,humidity is 0%-95%RH(non-condensing),and protection rating is IP20.
Product Features:Each channel supports a maximum input of 24VDC,compatible with a wide range of sensors and actuators commonly used in industrial environments.It features ultra-fast response time,ensuring immediate and accurate data processing,significantly improving operational efficiency and reducing downtime.The modular design facilitates easy panel mounting,reducing setup time and enabling rapid maintenance or upgrades without interrupting production.
ABB Model: GBU72 3BHE055094R0002 Model: 3BHE055094R0002 GBU72 Model: GBU72 Model: 3BHE055094R0002 Model: 3BHE031197R0001 Model: 3BHB030310R0001 Model: 73BHE055094R0002 GBU72 Model: 73BHE055094R0002 Model: GBU72 Model: ABB PCS6000 PRODUCT FAMLIY ABB 5SHY4045L0006 3BHB030310R0001 3BHE039203R0101 GVC736CE101
