描述
产品概述
ABB SYN5200a-Z，V217 SYNCHROTACT5 3BHB006713R0217是一款第五代数字同步控制器，专为电力系统的自动同步与并联设计。其核心功能包括发电机与电网、线路之间的同步并联操作，支持多通道冗余配置，适用于发电厂、工业设施、可再生能源系统及配电网络等场景。该设备通过精确的电压、频率和相位匹配，确保并联过程的安全性和稳定性，同时支持灵活的参数配置与远程监控。
技术参数
电气性能
工作频率：50 Hz、60 Hz或16.7 Hz
输入电压范围：100-240 V AC
功率损耗：典型值24 W/35 VA（双通道冗余系统）
通信协议：IEC 61850、Modbus、Profibus、LON（支持以太网远程服务）
物理特性
尺寸：标准机架安装尺寸（具体尺寸未明确标注，参考同类设备约10 cm×2.5 cm×25.4 cm）
重量：约3.3 kg
环境适应性：
工作温度：-10°C至50°C
防护等级：未明确标注，但符合工业级抗干扰与防尘设计
功能配置
通道设计：双通道冗余系统，硬件与软件独立，支持故障无缝切换
参数集数量：最多存储7个参数集，适配不同并联条件
数字I/O：7个可配置输入/输出端口，支持参数集切换与状态监测
核心功能特点
高安全性与可靠性
双通道冗余：两个独立微处理器系统（硬件与软件不同）协同工作，防止误并联，符合IEC 61508 SIL2安全标准。
故障监测：实时检测电压、频率、相位差，并生成事件日志（存储256个带时间戳的事件）。
精准同步控制
自动匹配算法：通过测量输入电压（U1、U2）的振幅、频率和相位，计算超前角，确保断路器在最佳时机闭合，减少电网冲击。
死母线/死线功能：支持一端无电压的并联操作，扩展应用场景。
灵活配置与扩展性
参数设置：通过SynView PC工具或前面板配置参数，支持自动推荐值（基于断路器、调速器特性）。
通信集成：兼容MODBUS、Profibus等工业协议，可无缝接入SCADA系统。
环保与维护
模块化设计：电路板易于拆卸，符合环保回收标准。
诊断工具：内置故障检测与报警功能，简化维护流程。
XVC768101 3BHB007211R101
XVC768101 3BHB007211R101
Product Overview
ABB SYN5200a-Z,V217 SYNCHROTACT5 3BHB006713R0217 is a fifth generation digital synchronization controller designed for automatic synchronization and parallel connection of power systems.Its core functions include synchronous parallel operation between the generator and the power grid and the circuit,and supports multi-channel redundant configuration,which is suitable for power plants,industrial facilities,renewable energy systems and distribution networks.The device ensures safety and stability of the parallel process through precise voltage,frequency and phase matching,while supporting flexible parameter configuration and remote monitoring.
Technical parameters
Electrical performance
Operating frequency:50 Hz,60 Hz or 16.7 Hz
Input voltage range:100-240 V AC
Power loss:typ.24 W/35 VA(dual channel redundant system)
Communication protocol:IEC 61850,Modbus,Profibus,LON(supports Ethernet remote service)
Physical characteristics
Size:Standard rack mounting size(the specific size is not clearly marked,refer to similar equipment about 10 cm×2.5 cm×25.4 cm)
Weight:Approximately 3.3 kg
Environmental adaptability:
Operating temperature:-10°C to 50°C
Protection level:Not clearly marked,but conforms to industrial-grade anti-interference and dustproof design
Functional configuration
Channel design:dual-channel redundant system,independent hardware and software,supports seamless switching of faults
Number of parameter sets:Up to 7 parameter sets are stored,adapted to different parallel conditions
Digital I/O:7 configurable input/output ports,supporting parameter set switching and status monitoring
Core functional features
High safety and reliability
Dual-channel redundancy:Two independent microprocessor systems(hardware and software)work together to prevent mis-shandling and comply with IEC 61508 SIL2 safety standards.
Fault monitoring:Detect voltage,frequency,and phase difference in real time,and generate event logs(store 256 timestamped events).
Precise synchronization control
Automatic matching algorithm:calculate the lead angle by measuring the amplitude,frequency and phase of the input voltage(U1,U2),ensuring that the circuit breaker is closed at the best time and reducing grid impact.
Dead bus/dead line function:supports voltage-free parallel operation at one end to expand application scenarios.
Flexible configuration and scalability
Parameter settings:Automatic recommended values(based on circuit breaker and speed controller characteristics)are supported through the SynView PC tool or the front panel configuration parameters.
Communication integration:compatible with industrial protocols such as MODBUS,Profibus,etc.,and can seamlessly connect to SCADA systems.
Environmental protection and maintenance
Modular design:The circuit board is easy to disassemble and meets environmentally friendly recycling standards.
Diagnostic tools:Built-in fault detection and alarm functions to simplify maintenance processes.
