描述
一、核心功能与定位
产品类型
功能：多功能控制与通信模块，兼具工业自动化控制、保护功能及多协议通信能力，适用于电力、能源、制造业等领域的设备控制与监测。
兼容性：支持ABB 800xA系统、DCS/PLC控制器及工业网络协议（如Modbus、EtherNet/IP）。
核心特性
控制与保护：集成电机控制、故障保护（过流、短路、过热）及实时监测功能。
多协议通信：支持RS-232、RS-422/485、EtherNet/IP等工业协议，适配复杂系统集成。
扩展性：支持热插拔及多模块扩展，适用于分布式控制系统。
二、技术参数
硬件规格
工作温度：-20°C至+55°C（标准型），扩展型可达-40°C至+85°C。
防护等级：IP20（控制室）或更高（工业现场）。
电源：DC 24V或AC 220V（具体需参考配置）。
通信接口
串行接口：支持RS-232、RS-422/485，通信速率最高921 Kbps。
以太网接口：双端口千兆以太网，支持EtherNet/IP、Modbus-TCP及DLR（设备级环）协议。
扩展接口：4个PCI、4个PCIex1、1个PCIex16（部分型号）。
I/O功能
模拟量输入：支持Pt100、Ni120 RTD及电位计信号，精度±0.06%。
数字量输入/输出：6通道数字输入，4通道数字输出，支持3线传感器。
隔离保护：通道间及系统隔离，耐受240Vrms连续过载。
三、功能特性
控制与保护
电机控制：调节电机速度、方向及励磁电流，支持变频器与软启动器集成。
故障保护：实时监测短路、过流、过热等异常，触发保护动作并生成报警。
远程监控：通过以太网接口实现远程状态查看与参数配置。
通信与扩展
多协议支持：兼容Modbus、EtherNet/IP、PROFINET等，适配第三方设备。
DLR网络弹性：设备级环路协议支持，确保网络中断时自动切换备用路由。
UAC383AE01
UAC383AE01
1.Core functions and positioning
Product Type
Function:Multifunctional control and communication module,which combines industrial automation control,protection functions and multi-protocol communication capabilities,is suitable for equipment control and monitoring in power,energy,manufacturing and other fields.
Compatibility:Supports ABB 800xA system,DCS/PLC controller and industrial network protocols(such as Modbus,EtherNet/IP).
Core features
Control and protection:Integrated motor control,fault protection(overcurrent,short circuit,overheating)and real-time monitoring functions.
Multi-protocol communication:supports industrial protocols such as RS-232,RS-422/485,EtherNet/IP,and adapts to complex system integration.
Extensibility:Supports hot-swap and multi-module expansion,suitable for distributed control systems.
2.Technical parameters
Hardware specifications
Operating temperature:-20°C to+55°C(standard type),extended type up to-40°C to+85°C.
Protection level:IP20(control room)or higher(industrial site).
Power supply:DC 24V or AC 220V(refer to the configuration for details).
Communication interface
Serial interface:supports RS-232,RS-422/485,and the communication rate is up to 921 Kbps.
Ethernet interface:Dual-port Gigabit Ethernet,supports EtherNet/IP,Modbus-TCP and DLR(device-level ring)protocols.
Extended interface:4 PCIs,4 PCIex1,1 PCIex16(some models).
I/O functions
Analog input:Supports Pt100,Ni120 RTD and potentiometer signals,with accuracy of±0.06%.
Digital input/output:6-channel digital input,4-channel digital output,support 3-wire sensors.
Isolation protection:Isolated between channels and systems,withstand continuous overload of 240Vrms.
3.Functional characteristics
Control and protection
Motor control:adjusts the motor speed,direction and excitation current,and supports the integration of the inverter and soft starter.
Failure protection:Monitor short circuit,overcurrent,overheating and other abnormalities in real time,trigger protection actions and generate alarms.
Remote monitoring:Remote status viewing and parameter configuration are realized through the Ethernet interface.
Communication and Extension
Multi-protocol support:compatible with Modbus,EtherNet/IP,PROFINET,etc.,and adapted to third-party devices.
DLR Network Resilience:Device-level loop protocol support,ensuring automatic switching of alternate routes when network interruptions are made.
