描述
一、核心功能与定位
产品类型
功能：工业自动化控制系统模块，兼具通信接口、模拟量输入/输出及驱动控制功能，适用于电力、冶金、石化等工业场景。
兼容性：支持ABB Ability™系统（如AC 800M控制器）、DCS/PLC系统，兼容多协议通信（如Modbus、EtherNet/IP）。
核心特性
多模式集成：融合通信控制、模拟量信号处理及驱动控制功能，支持电动阀门、电机驱动等设备的精准控制。
高可靠性：通过工业级认证（如UL），适应高温、高湿、多尘环境（工作温度范围-10°C至+60°C）。
二、技术参数
硬件配置
电气规格：
工作电压：220V AC，支持宽电压输入。
处理速度：15Hz（典型值）。
程序容量：3MB，数据容量2MB。
接口类型：
通信接口：以太网、Profibus、RS485等工业协议接口。
I/O扩展：支持模拟量输入（电压/电流）及数字量输入/输出。
物理特性
封装形式：BGA（球栅阵列封装）或模块化结构，重量约1.1kg。
防护等级：IP20（控制室安装）或更高（工业现场安装）。
三、功能特性
通信与控制
多协议支持：兼容Modbus、EtherNet/IP等协议，实现与HMI（人机界面）及第三方设备的数据交互。
通信速率：支持高速实时通信（延迟≤20μs）。
模拟量处理
高精度转换：支持电压（0-10V）、电流（4-20mA）等信号的高精度采集与输出，误差≤0.1%。
信号隔离：光隔离技术防止噪声干扰，确保信号稳定性。
驱动控制
电机控制：将高压直流电转换为交流电信号，驱动电机旋转并调节转速与扭矩。
保护功能：
过流保护：电流异常时自动切断输出，防止设备损坏。
电池保护：监测电池电压，避免过充或过放。
诊断与维护
状态监测：通过LED指示灯或通信接口实时反馈模块运行状态。
故障诊断：支持远程诊断，快速定位通信或信号异常问题。
UNITROL1000 UN1000a-Z,V3 3BHE005774R0003
UNITROL1000 UN1000a-Z,V3 3BHE005774R0003
1.Core functions and positioning
Product Type
Function:Industrial automation control system module,which has communication interface,analog input/output and drive control functions,and is suitable for industrial scenarios such as electricity,metallurgy,and petrochemical.
Compatibility:Supports ABB Ability™systems(such as AC 800M controller),DCS/PLC systems,and is compatible with multi-protocol communications(such as Modbus,EtherNet/IP).
Core features
Multi-mode integration:integrates communication control,analog signal processing and drive control functions,and supports precise control of electric valves,motor drives and other equipment.
High reliability:Industrial-grade certification(such as UL),adapted to high temperature,high humidity,dusty environments(operating temperature range-10°C to+60°C).
2.Technical parameters
Hardware configuration
Electrical specifications:
Operating voltage:220V AC,supports wide voltage input.
Processing speed:15Hz(typical).
Program capacity:3MB,data capacity 2MB.
Interface type:
Communication interface:Industrial protocol interfaces such as Ethernet,Profibus,RS485,etc.
I/O extension:supports analog input(voltage/current)and digital input/output.
Physical characteristics
Packaging form:BGA(ball grid array package)or modular structure,weighing about 1.1kg.
Protection level:IP20(control room installation)or higher(industrial site installation).
3.Functional characteristics
Communication and Control
Multi-protocol support:compatible with Modbus,EtherNet/IP and other protocols,realizing data interaction with HMI(human-computer interface)and third-party devices.
Communication rate:Supports high-speed real-time communication(delay≤20μs).
Simulation processing
High-precision conversion:supports high-precision acquisition and output of signals such as voltage(0-10V),current(4-20mA),with an error of≤0.1%.
Signal isolation:Optical isolation technology prevents noise interference and ensures signal stability.
Driver control
Motor control:convert high-voltage DC to alternating current signals,drive the motor to rotate and adjust the speed and torque.
Protection function:
Overcurrent protection:Automatically cut off the output when the current is abnormal to prevent damage to the equipment.
Battery protection:Monitor battery voltage to avoid overcharge or overdischarge.
Diagnosis and maintenance
Status monitoring:Real-time feedback of the module’s operating status through the LED indicator or communication interface.
Troubleshooting:Supports remote diagnosis,quickly locate communication or signal abnormalities.
