描述
ABB SDCS-PIN-4-COAT是一款专为工业自动化设计的电源控制主板，属于ABB SDCS系列产品，广泛应用于分布式控制系统（DCS）和关键设备的电源管理。以下是其核心功能与技术特性的综合概述：
一、技术参数与性能
输入电压范围
支持100-240V AC（50/60Hz），宽电压设计适应不同工业场景需求。
输出功率与电流
最大输出功率400W，支持多路输出配置，具体电流参数根据实际负载定制。
保护功能
-过压/过流保护：内置电路防止电压或电流异常导致设备损坏。
-短路保护：快速切断短路回路，避免系统故障扩散。
效率与散热
-转换效率>85%，符合高能效标准。
-增强散热设计（较标准版本高5mm），工作温度范围扩展至-10°C至+55°C。
尺寸与认证
尺寸：230mm×150mm×55mm（含涂层），符合CE、UL、TUV等国际认证，满足RoHS标准。
二、核心功能与特点
冗余设计
支持冗余电源模块配置，提升系统可靠性，适用于关键设备（如冶金、石油化工）的不间断运行。
远程监控与控制
通过RS232/485接口实现远程状态监测与参数调整，简化运维管理。
热插拔兼容性
支持热插拔功能（需额外配件），便于维护与升级，减少系统停机时间。
电磁兼容性
符合EN61000-6-2/4标准，抗干扰能力强，适用于复杂工业电磁环境。
三、应用场景
冶金行业
为轧钢机、连铸机等设备提供稳定电源，保障高精度运行。
造纸与包装
优化造纸机、复卷机的励磁控制，提升纸张质量和生产效率。
石油化工
应用于压缩机、泵类设备，降低能耗并增强系统稳定性。
电力与能源
集成于变频器、DCS系统，支持高效功率管理与安全控制。
四、与其他模块的兼容性
扩展性：可与SDCS系列其他模块（如SDCS-POW-4、SDCS-FEX-2A）协同工作，构建完整的自动化电源解决方案。
协议支持：兼容Modbus RTU等工业协议，便于系统集成。
DSDO115A 3BSE018298R1
DSDO115A 3BSE018298R1
ABB SDCS-PIN-4-COAT is a power control motherboard designed for industrial automation.It belongs to the ABB SDCS series and is widely used in power management of distributed control systems(DCS)and key equipment.The following is a comprehensive overview of its core functions and technical features:
I.Technical parameters and performance
Input voltage range
Supports 100-240V AC(50/60Hz),and the wide voltage design adapts to the needs of different industrial scenarios.
Output power and current
The maximum output power is 400W,and multiple output configurations are supported.The specific current parameters are customized according to the actual load.
Protection function
-Overvoltage/overcurrent protection:Built-in circuit prevents voltage or current abnormalities from causing equipment damage.
-Short circuit protection:Quickly cut off the short circuit loop to avoid the spread of system faults.
Efficiency and heat dissipation
-Conversion efficiency>85%,in line with high energy efficiency standards.
-Enhanced heat dissipation design(5mm higher than the standard version),the operating temperature range is extended to-10°C to+55°C.
Dimensions and certifications
Dimensions:230mm×150mm×55mm(including coating),in compliance with international certifications such as CE,UL,TUV,and RoHS standards.
2.Core functions and features
Redundant design
Supports redundant power module configuration to improve system reliability,suitable for uninterrupted operation of key equipment(such as metallurgy and petrochemicals).
Remote monitoring and control
Remote status monitoring and parameter adjustment are achieved through the RS232/485 interface to simplify operation and maintenance management.
Hot-swap compatibility
Supports hot-swap function(additional accessories are required)to facilitate maintenance and upgrades and reduce system downtime.
Electromagnetic compatibility
Complies with EN61000-6-2/4 standards,has strong anti-interference ability,and is suitable for complex industrial electromagnetic environments.
3.Application scenarios
Metallurgical industry
Provides stable power supply for equipment such as rolling mills and continuous casting machines to ensure high-precision operation.
Papermaking and packaging
Optimize the excitation control of papermaking machines and rewinders to improve paper quality and production efficiency.
Petrochemicals
Applied to compressors and pumps to reduce energy consumption and enhance system stability.
Power and Energy
Integrated in inverters and DCS systems to support efficient power management and safety control.
IV.Compatibility with other modules
Expandability:Can work with other modules in the SDCS series(such as SDCS-POW-4,SDCS-FEX-2A)to build a complete automated power solution.
Protocol support:Compatible with industrial protocols such as Modbus RTU for easy system integration.
