描述
一、产品概述
ADEPT 10350-01040是一款工业级温度传感器模块，专为高精度环境监测和工业控制设计，支持多通道温度采集与实时数据输出。其核心功能包括热电偶/热电阻信号输入、温度补偿、抗干扰保护等，广泛应用于电力、化工、冶金及实验室环境。
二、核心功能与特点
温度测量能力
多通道支持：支持4通道输入，兼容K型、J型热电偶及PT100/PT1000热电阻。
高精度与稳定性：测量精度达±0.25°C（典型值），线性误差≤0.1%FS。
温度范围：-200°C至+1750°C（热电偶模式），-50°C至+300°C（热电阻模式）。
信号处理与输出
数字信号输出：支持RS485、模拟电压（0-10V）或电流（4-20mA）输出，兼容PLC、DCS系统。
抗干扰设计：采用隔离电路和软件滤波算法，抑制电磁干扰（EMI）和噪声。
工业级可靠性
宽温工作：工作温度范围-40°C至+70°C，存储温度达-50°C至+85°C。
防护等级：IP65（防尘防水），适应户外或潮湿环境。
灵活配置
参数可编程：通过上位机软件设置通道类型、量程、报警阈值及通信协议。
冗余保护：支持双电源输入（12-36 V DC），内置过压、过流保护。
三、技术参数
参数类别规格
输入通道4通道（可选热电偶或热电阻）
输出接口RS485（Modbus RTU）、模拟电压/电流（0-10V/4-20mA）
采样速率100次/秒/通道
通信协议Modbus RTU、自定义ASCII协议
电源要求12-36 V DC（推荐24 V DC）
尺寸100mm×80mm×30mm
四、典型应用场景
工业过程监控
锅炉温度监测、反应釜温度控制、电机绕组温度保护。
实验室与科研
精密仪器温度校准、材料热性能测试。
能源与电力
电力变压器油温监测、输电线路接头温度检测。
1.Product Overview
ADEPT 10350-01040 is an industrial-grade temperature sensor module designed for high-precision environmental monitoring and industrial control,supporting multi-channel temperature acquisition and real-time data output.Its core functions include thermocouple/thermoresis signal input,temperature compensation,anti-interference protection,etc.,and are widely used in power,chemical,metallurgy and laboratory environments.
2.Core functions and features
Temperature measurement capability
Multi-channel support:supports 4-channel input,compatible with K-type and J-type thermocouples and PT100/PT1000 thermal resistors.
High accuracy and stability:The measurement accuracy reaches±0.25°C(typical),linear error≤0.1%FS.
Temperature range:-200°C to+1750°C(thermocouple mode),-50°C to+300°C(thermoresis mode).
Signal processing and output
Digital signal output:supports RS485,analog voltage(0-10V)or current(4-20mA)output,compatible with PLC and DCS systems.
Anti-interference design:Use isolation circuits and software filtering algorithms to suppress electromagnetic interference(EMI)and noise.
Industrial-grade reliability
Wide temperature operation:Operating temperature range-40°C to+70°C,storage temperature up to-50°C to+85°C.
Protection level:IP65(dust-proof and waterproof),suitable for outdoor or humid environments.
Flexible configuration
Parameters are programmable:the channel type,range,alarm threshold and communication protocol are set through the host computer software.
Redundancy protection:supports dual power input(12-36 V DC),with built-in overvoltage and overcurrent protection.
3.Technical parameters
Parameter Category Specifications
Input channel 4 channels(optional thermocouple or thermoresistor)
Output interface RS485(Modbus RTU),analog voltage/current(0-10V/4-20mA)
Sampling rate 100 times/second/channel
Communication Protocol Modbus RTU,Custom ASCII Protocol
Power requirements 12-36 V DC(24 V DC recommended)
Size 100mm×80mm×30mm
4.Typical application scenarios
Industrial process monitoring
Boiler temperature monitoring,reactor temperature control,motor winding temperature protection.
Laboratory and scientific research
Precision instrument temperature calibration and material thermal performance testing.
Energy and Electricity
Power transformer oil temperature monitoring and transmission line connector temperature detection.
