AEG Modicon BAT 102 244730 其他

产品简要说明

AEG Modicon BAT 102 244730是施耐德电气(Schneider Electric)为Modicon系列PLC设计的工业级备用电池,专为关键设备断电保护与应急供电场景开发。其核心功能包括:

高容量锂铁电池:12V/4Ah持续供电能力

极端环境适应性:-40℃至70℃宽温工作范围

智能充放电管理:支持BMS系统(电池管理系统)

产品详细说明

1.电池技术特性

电化学体系

正极材料:磷酸铁锂(LiFePO₄)

负极材料:石墨复合材料

电解液:高安全性有机电解质(无钴配方)

能量密度与循环寿命

能量密度:≥120Wh/kg(典型值)

分类: 品牌:

描述

产品简要说明

AEG Modicon BAT 102 244730是施耐德电气(Schneider Electric)为Modicon系列PLC设计的工业级备用电池,专为关键设备断电保护与应急供电场景开发。其核心功能包括:

高容量锂铁电池:12V/4Ah持续供电能力

极端环境适应性:-40℃至70℃宽温工作范围

智能充放电管理:支持BMS系统(电池管理系统)

产品详细说明

1.电池技术特性

电化学体系

正极材料:磷酸铁锂(LiFePO₄)

负极材料:石墨复合材料

电解液:高安全性有机电解质(无钴配方)

能量密度与循环寿命

能量密度:≥120Wh/kg(典型值)

充放电循环:2000次 100%DOD(深度放电)

自放电率:≤1%/月(25℃)

安全防护设计

过充保护:3.6V/单节电压阈值切断

过放保护:2.0V/单节电压阈值切断

热失控防护:陶瓷隔膜+气凝胶复合阻燃层

2.环境适应性与安装设计

宽温工作能力

低温启动:-40℃下可输出≥80%额定容量

高温耐受:70℃连续工作48小时无性能衰减

机械结构

外壳材质:铝合金压铸(阳极氧化处理)

防护等级:IP67(浸水1米/30分钟)

抗震能力:10g冲击(11ms半正弦波)

产品概述:AEG Modicon BAT 102 244730

作为Modicon系列PLC的核心供电单元,其核心价值在于高可靠性与长寿命:

技术优势:

锂铁电池特性:无记忆效应+零维护

智能BMS:实时监测电压/温度/SOC(剩余电量)

行业适配:

数据中心:服务器断电保护

轨道交通:信号系统应急供电

石油石化:防爆环境下的PLC供电

Product brief description

AEG Modicon BAT 102 244730 is an industrial-grade spare battery designed by Schneider Electric for Modicon series PLCs,specially developed for key equipment power outage protection and emergency power supply scenarios.Its core functions include:

High-capacity lithium-iron battery:12V/4Ah continuous power supply capacity

Extreme environmental adaptability:-40℃to 70℃wide temperature operating range

Intelligent charging and discharging management:Supports BMS system(battery management system)

Product details

1.Battery technical characteristics

Electrochemical system

Positive electrode material:Lithium iron phosphate(LiFePO₄)

Negative electrode material:graphite composite material

Electrolyte:High-safe organic electrolyte(cobalt-free formula)

Energy density and cycle life

Energy density:≥120Wh/kg(typical)

Charge and discharge cycle:2000 times 100%DOD(deep discharge)

Self-discharge rate:≤1%/month(25℃)

Safety protection design

Overcharge protection:3.6V/single voltage threshold cutoff

Over-discharge protection:2.0V/single voltage threshold cutoff

Thermal runaway protection:ceramic diaphragm+aerogel composite flame retardant layer

2.Environmental adaptability and installation design

Wide temperature working ability

Low temperature start:≥80%of the rated capacity can be output at-40℃

High temperature tolerance:continuous operation at 70℃for 48 hours without performance attenuation

Mechanical structure

Housing material:aluminum alloy die-casting(anodized treatment)

Protection level:IP67(soaked in water for 1 meter/30 minutes)

Shock resistance:10g impact(11ms half sine wave)

Product Overview:AEG Modicon BAT 102 244730

As the core power supply unit of Modicon series PLC,its core value lies in high reliability and long life:

Technical Advantages:

Lithium-iron battery characteristics:no memory effect+zero maintenance

Smart BMS:Real-time monitoring of voltage/temperature/SOC(remaining power)

Industry adaptation:

Data center:Server power outage protection

Rail Transit:Emergency Power Supply of Signal System

Petroleum and Petrochemical:PLC power supply in explosion-proof environment