描述
产品概述
BAUMER OADM 20I6572/S14F是瑞士堡盟（Baumer）推出的激光测距传感器，属于通过式光电传感器（Through Beam Sensor）系列。其核心功能是实现长距离线性位置测量，适用于工业自动化、机器人、能源设备等领域的高精度检测需求。
技术参数
测量特性
测量范围：50 mm至300 mm（最小至最大距离）
分辨率：0.01 mm至0.33 mm（线性误差<0.03%Sd/K，温度漂移极低）
光束类型：直线光束，宽度2.5 mm，高度4-12 mm
电气参数
工作电压：12-28 V DC
输出信号：4-20 mA模拟电流输出，可选0-10 V DC
响应时间：<0.9 ms（释放时间同响应时间）
功耗：最大120 mA（无负载时）
环境适应性
工作温度：-20°C至50°C
防护等级：IP 67（防尘防水，适用于工业环境）
抗干扰：反向极性保护、短路保护、EMI抗干扰设计
机械结构
尺寸：主体宽度20.6 mm，高度65 mm，长度50 mm
材质：压铸锌外壳，耐腐蚀性强
安装方式：板装式（BOARD MOUNT）
核心功能特点
高精度与稳定性
采用脉冲式红光激光二极管（波长650 nm），光束稳定，线性误差极低，适用于精密加工、机械定位等场景。
支持自学习功能（按键/外部触发），可动态调整测量基准。
多模式输出与兼容性
双输出模式：同时支持电流（4-20 mA）和电压（0-10 V）信号输出，适配不同工业控制系统。
通信接口：8线制接口，支持同步输入（SYNC IN）和外部触发（EXT TEACH）。
智能状态反馈
LED指示灯：绿色LED表示电源正常，红色LED提示镜头污染或故障。
报警输出：PNP型报警信号，可快速响应异常状态。
工业级可靠性
抗环境干扰：IP 67防护等级，适应油污、粉尘、湿度高等复杂环境。
长寿命设计：激光光源寿命长，机械结构坚固，适合长期稳定运行。
SDCS-CON-4-COAT-ROHS
SDCS-CON-4-COAT-ROHS
Product Overview
BAUMER OADM 20I6572/S14F is a laser ranging sensor launched by Baumer,which belongs to the Through Beam Sensor series.Its core function is to realize long-distance linear position measurement,which is suitable for high-precision detection needs in industrial automation,robots,energy equipment and other fields.
Technical parameters
Measurement characteristics
Measuring range:50 mm to 300 mm(minimum to maximum distance)
Resolution:0.01 mm to 0.33 mm(linear error<0.03%Sd/K,extremely low temperature drift)
Beam type:linear beam,width 2.5 mm,height 4-12 mm
Electrical parameters
Operating voltage:12-28 V DC
Output signal:4-20 mA analog current output,optional 0-10 V DC
Response time:<0.9 ms(release time and response time)
Power consumption:Maximum 120 mA(without load)
Environmental adaptability
Operating temperature:-20°C to 50°C
Protection level:IP 67(dust-proof and waterproof,suitable for industrial environments)
Anti-interference:reverse polarity protection,short circuit protection,EMI anti-interference design
Mechanical structure
Dimensions:Body width 20.6 mm,height 65 mm,length 50 mm
Material:die-cast zinc shell,strong corrosion resistance
Installation method:BOARD MOUNT
Core functional features
High precision and stability
It adopts pulsed red laser diode(wavelength 650 nm),with stable beam and extremely low linear error,and is suitable for precision processing,mechanical positioning and other scenarios.
Supports self-learning function(key/external trigger),and can dynamically adjust the measurement reference.
Multi-mode output and compatibility
Dual output mode:supports both current(4-20 mA)and voltage(0-10 V)signal output,and is suitable for different industrial control systems.
Communication interface:8-wire interface,supports synchronous input(SYNC IN)and external trigger(EXT TEACH).
Intelligent status feedback
LED indicator:Green LED indicates normal power supply,red LED indicates contamination or failure of lens.
Alarm output:PNP type alarm signal,which can quickly respond to abnormal states.
Industrial-grade reliability
Anti-environmental interference:IP 67 protection level,adapting to complex environments such as oil,dust,and high humidity.
Long-life design:The laser light source has a long life and a strong mechanical structure,suitable for long-term and stable operation.
