描述
BENTLY NEVADA 3500/22-01-01-00是一款核心数据接口模块，用于连接3500机械监测系统与兼容软件（如System 1状态监控软件和3500组态软件）。以下是其产品简介：
一、核心功能
数据接口与通信整合
-担任3500系统与主计算机软件的桥梁，集成框架接口模块（RIM）与通信处理器（如TDXnet）功能，通过以太网传输稳态和瞬态波形数据。
-支持静态数据采集，可选配通道使能磁盘扩展动态瞬态数据捕获能力。
系统兼容性
-兼容M系列监测器（如3500/40M、3500/42M），实现振动、位移等多类型传感器数据的统一处理与传输。
二、硬件特性
模块化设计
-安装于3500框架的第一个插槽（紧邻电源模块），仅占用单个槽位。
-支持两种输入/输出模块类型：10/100 Base-T以太网或100 Base-FX光纤，满足不同通信需求。
冗余配置
-标准型（01）适用于常规监测，TMR冗余型（02）通过三重模块表决机制增强可靠性，持续比对冗余监测器输出并触发错误指示。
三、数据采集与处理
静态数据：默认支持常规参数采集，如振动幅值、相位等。
瞬态数据：通过可选磁盘扩展，捕捉高分辨率的启动/停机、报警前/后数据，支持速度范围内的动态事件分析。
四、系统角色与依赖
非关键路径：虽提供框架级通用功能（如地址设置、通信协议管理），但不直接影响机械保护通道的正常运行。
必备组件：每个3500框架需配置一个TDI或RIM模块，以实现数据传输与系统配置。
五、扩展与维护
备件型号：标准模块138607-01、TMR模块138607-02，输入/输出模块146031-01/02。
维护要求：支持热插拔，LED指示灯显示运行状态，可通过组态软件远程配置参数。
128275-01
128275-01
BENTLY NEVADA 3500/22-01-01-00 is a core data interface module used to connect the 3500 machinery monitoring system with compatible software(such as System 1 condition monitoring software and 3500 configuration software).The following is a product introduction:
I.Core Functions
Data Interface and Communication Integration
-Serves as a bridge between the 3500 system and the host computer software,integrating the functions of the frame interface module(RIM)and the communication processor(such as TDXnet),and transmitting steady-state and transient waveform data via Ethernet.
-Supports static data acquisition,and the channel-enabled disk can be optionally equipped to expand the dynamic transient data capture capability.
System Compatibility
-Compatible with M series monitors(such as 3500/40M,3500/42M),realizing unified processing and transmission of multiple types of sensor data such as vibration and displacement.
II.Hardware Features
Modular Design
-Installed in the first slot of the 3500 frame(next to the power module),occupying only a single slot.
-Supports two types of input/output modules:10/100 Base-T Ethernet or 100 Base-FX fiber to meet different communication needs.
Redundant Configuration
-Standard type(01)is suitable for routine monitoring,and TMR redundant type(02)enhances reliability through a triple module voting mechanism,continuously comparing redundant monitor outputs and triggering error indication.
III.Data Collection and Processing
Static data:By default,it supports routine parameter collection,such as vibration amplitude,phase,etc.
Transient data:Through optional disk expansion,it captures high-resolution start/stop,pre/post alarm data,and supports dynamic event analysis within the speed range.
IV.System Roles and Dependencies
Non-critical path:Although it provides common functions at the frame level(such as address setting and communication protocol management),it does not directly affect the normal operation of the mechanical protection channel.
Required components:Each 3500 frame must be configured with a TDI or RIM module to achieve data transmission and system configuration.
V.Expansion and maintenance
Spare parts model:standard module 138607-01,TMR module 138607-02,input/output module 146031-01/02.
Maintenance requirements:Support hot swap,LED indicator light shows the operating status,and parameters can be remotely configured through the configuration software.
