描述
一、产品概述
FIREYE EP160是一款专为工业燃烧控制系统设计的编程器模块，属于火焰安全监控系统核心组件，主要用于自动点火、火焰监测及燃烧器逻辑控制。其设计符合EN298等国际安全标准，适用于商业和工业规模的加热设备。
二、核心功能
火焰监测与控制
实时监测火焰状态，支持紫外线（UV）或火焰棒（FR）传感器类型选择，确保燃烧安全。
火焰故障响应时间：4秒（EP165/EP166型号为2秒），故障后自动触发安全锁定并报警。
编程与配置
通过DIP开关（6个双列直插式开关）配置操作特性，包括吹扫定时、联锁电路验证（如3-P运行联锁）。
支持与ED510显示器或ED500通信接口配合，实现参数设置、历史数据记录（燃烧器周期、故障记录等）。
安全联锁机制
吹扫联锁：在操作循环开始时验证鼓风机状态，确保燃烧前吹扫完成。
低火启动联锁：通过端子M控制电机延迟启动，防止快速回收时误操作。
通信与扩展
集成RJ45接口，支持Modbus协议通信，兼容多点配置或远程监控系统（如InTouch）。
与E500通信接口向后兼容，确保系统升级时数据连续性。
三、技术参数
参数类别具体规格
处理器基于微处理器，存储燃烧器运行数据（周期、小时数、故障记录）
接口类型RJ45（Modbus）、RS-232（兼容ED500）
响应时间火焰故障响应≤4秒，吹扫时间可编程（30秒默认）
防护等级前面板IP65（安装后），后面板IP20
电源输入支持120 VAC/230 VAC，50/60 Hz
物理尺寸安装开口163.5×93.5 mm，面板尺寸174×102 mm
1.Product Overview
FIREYE EP160 is a programmer module designed for industrial combustion control systems.It is a core component of the flame safety monitoring system and is mainly used for automatic ignition,flame monitoring and burner logic control.Its design complies with international safety standards such as EN298 and is suitable for heating equipment on both commercial and industrial scale.
2.Core functions
Flame monitoring and control
Monitor flame status in real time,supports ultraviolet(UV)or flame rod(FR)sensor type selection to ensure combustion safety.
Flame fault response time:4 seconds(2 seconds for EP165/EP166 models),safety lock is automatically triggered and alarm is called after the fault.
Programming and configuration
Configure operation characteristics with DIP switches(6 dual inline switches),including purge timing,interlock circuit verification(such as 3-P operation interlock).
Supports cooperation with the ED510 monitor or ED500 communication interface to realize parameter settings,historical data recording(burner cycle,fault recording,etc.).
Security interlocking mechanism
Purge interlock:Verify the blower status at the start of the operation cycle to ensure that the purge is completed before combustion.
Low-fire start interlock:Control the motor delayed start through terminal M to prevent misoperation during rapid recovery.
Communication and Extension
Integrated RJ45 interface,supports Modbus protocol communication,and is compatible with multi-point configuration or remote monitoring systems(such as InTouch).
Backward compatibility with the E500 communication interface to ensure data continuity during system upgrade.
3.Technical parameters
Parameter category Specific specifications
Processor Based on microprocessor,storing burner running data(cycles,hours,fault records)
Interface type RJ45(Modbus),RS-232(compatible with ED500)
Response time Flame fault response≤4 seconds,purge time is programmable(30 seconds default)
Protection level Front panel IP65(after installation),rear panel IP20
Power input Support 120 VAC/230 VAC,50/60 Hz
Physical dimensions Installation opening 163.5×93.5 mm,panel size 174×102 mm
