描述
GE 760-P5-G5-S5-HI-A20-R-E是一款高性能继电保护与控制系统装置，专为工业电力系统设计，具备高精度电流监测、灵活通信及全面监控功能。以下是其核心功能与技术参数的综合解析：
一、产品概述
该装置集成了继电保护、数据采集与控制功能，适用于配电系统、工业电机控制及电力设备监测场景，支持复杂电网环境下的故障检测与快速响应。
二、核心功能
多通道电流输入
-提供5 A相电流输入、5 A零序电流输入及5 A灵敏接地电流输入，支持宽范围电流监测需求。
-适用于变压器保护、电动机保护及电网故障分析等场景。
灵活电源适配
-支持88-300 VDC或70-265 VAC 48-62 Hz电源输入，兼容不同工业现场电压条件，确保稳定运行。
模拟输出与通信接口
-配备8个4-20 mA模拟输出通道，便于与PLC、DCS等控制系统集成。
-支持以太网10Base T通信协议，可接入工业网络实现远程监控与数据交互。
增强型监控与分析
-集成数据记录、示波器、波形捕获及实际值计量功能，可通过LCD显示屏或EnerVista 760软件进行趋势分析与可视化展示。
三、技术参数
工作温度：-40°C至+85°C（需结合具体型号）
防护等级：未明确标注（建议根据安装环境选择防护措施）
通信协议：以太网、Modbus（需配置）
四、应用场景
电力系统保护
-变压器保护、电动机过载保护及电网故障快速隔离。
工业自动化控制
-配合PLC实现设备启停控制、状态监测与异常报警。
智能运维
-通过远程数据采集与分析优化设备维护策略，降低停机风险。
F650NFLF2G5HIP6E
F650NFLF2G5HIP6E
GE 760-P5-G5-S5-HI-A20-R-E is a high-performance relay protection and control system device designed for industrial power systems.It has high-precision current monitoring,flexible communication and comprehensive monitoring functions.The following is a comprehensive analysis of its core functions and technical parameters:
I.Product Overview
The device integrates relay protection,data acquisition and control functions,and is suitable for distribution systems,industrial motor control and power equipment monitoring scenarios,supporting fault detection and rapid response in complex power grid environments.
II.Core Functions
Multi-channel current input
-Provides 5 A phase current input,5 A zero-sequence current input and 5 A sensitive ground current input to support wide-range current monitoring needs.
-Suitable for transformer protection,motor protection and power grid fault analysis.
Flexible power supply adaptation
-Supports 88-300 VDC or 70-265 VAC 48-62 Hz power input,compatible with different industrial field voltage conditions,and ensures stable operation.
Analog output and communication interface
-Equipped with 8 4-20 mA analog output channels,it is easy to integrate with control systems such as PLC and DCS.
-Support Ethernet 10Base T communication protocol,which can be connected to the industrial network for remote monitoring and data interaction.
Enhanced monitoring and analysis
-Integrated data recording,oscilloscope,waveform capture and actual value measurement functions,trend analysis and visualization can be performed through the LCD display or EnerVista 760 software.
III.Technical parameters
Operating temperature:-40°C to+85°C(need to be combined with specific models)
Protection level:not clearly marked(it is recommended to select protection measures according to the installation environment)
Communication protocol:Ethernet,Modbus(need to be configured)
IV.Application scenarios
Power system protection
-Transformer protection,motor overload protection and rapid isolation of power grid faults.
Industrial automation control
-Cooperate with PLC to realize equipment start and stop control,status monitoring and abnormal alarm.
Intelligent operation and maintenance
-Optimize equipment maintenance strategy through remote data collection and analysis to reduce downtime risks.
