描述
GE IC660ELB912 是一款专为工业自动化设计的 网络接口模块，属于 GE Fanuc（现为艾默生自动化）的 Genius I/O 系列，主要用于连接主机控制器与远程 I/O 设备，支持分布式控制架构。以下是其核心产品详情：
一、核心功能与特性
网络通信与数据管理
作为 Genius I/O 系统的核心接口，负责主机与远程 I/O 设备之间的数据传输，支持最多 30 个总线模块 的初始化与故障检测。
集成 双口 RAM 技术，实现 6303 微处理器与 64180 管理器微处理器之间的数据同步，确保高效通信。
支持 Genius 协议 和 Modbus RTU/ASCII（部分型号），兼容多种工业协议（如 Ethernet/IP、PROFINET、Modbus TCP）。
硬件与接口设计
接口类型：Genius 总线接口（支持冗余配置），传输速率 5Mbps（标准速率）。
物理尺寸：标准 DIN 导轨安装模块（约 100mm×100mm×50mm），支持导轨式或机架式安装。
电源要求：工作电压 24V DC±10%，逻辑电源需 5V DC。
状态监测与可靠性
配备 2 个状态指示 LED（“GENI OK”和“COMMS OK”），实时显示运行与通信状态。
隔离特性：通道间电气隔离，隔离电压≥2500V AC，适应工业环境的抗干扰与高可靠性需求。
二、技术参数
参数类别 规格
处理器 6303 串行接口微处理器（消息写入） + 64180 管理器微处理器（数据管理）
内存 共享 RAM 16 KB，双口 RAM 优化数据交换
通信速率 38.4K、76.8K、153.6K（标准/扩展模式）
环境适应性 工作温度：-40°C 至 +70°C；防护等级：IP20（需配合机柜防护）
物理尺寸 34×18×10 厘米（部分型号）
IC695CPE310-ABAB
IC695CPU315-BB
GE IC660ELB912 is a network interface module designed for industrial automation. It belongs to GE Fanuc (now Emerson Automation) Genius I/O series. It is mainly used to connect host controllers and remote I/O devices and supports distributed control architecture. Here are the details of its core product:
1. Core functions and features
Network communication and data management
As the core interface of the Genius I/O system, it is responsible for data transmission between the host and remote I/O devices, and supports initialization and fault detection of up to 30 bus modules.
Integrated dual-port RAM technology to achieve data synchronization between the 6303 microprocessor and the 64180 manager microprocessor to ensure efficient communication.
Supports Genius protocol and Modbus RTU/ASCII (some models), and is compatible with a variety of industrial protocols (such as Ethernet/IP, PROFINET, Modbus TCP).
Hardware and interface design
Interface type: Genius bus interface (supports redundant configuration), transmission rate 5Mbps (standard rate).
Physical dimensions: Standard DIN rail mounting module (approximately 100mm×100mm×50mm), supports rail-type or rack-type installation.
Power supply requirements: Operating voltage is 24V DC±10%, and logic power supply requires 5V DC.
Status Monitoring and Reliability
Equipped with 2 status indicator LEDs (“GENI OK” and “COMMS OK”) to display the operation and communication status in real time.
Isolation characteristics: electrical isolation between channels, isolation voltage ≥2500V AC, adapting to the anti-interference and high reliability requirements of industrial environments.
2. Technical parameters
Parameter Category Specifications
Processor 6303 Serial Interface Microprocessor (Message Writing) + 64180 Manager Microprocessor (Data Management)
Memory Shared RAM 16 KB, dual-port RAM optimized data exchange
Communication rate: 38.4K, 76.8K, 153.6K (standard/extended mode)
Environmental adaptability Operating temperature: -40°C to +70°C; Protection level: IP20 (needed to be protected with cabinet)
Physical dimensions 34×18×10 cm (some models)
