描述
一、核心功能与技术参数
1.伺服驱动功能
控制精度与响应：
支持高精度控制，速度频率响应最高可达1.2kHz，适用于对动态性能要求高的场景。
标配2500线编码器，可选配17位绝对值编码器，提升定位精度。
过载能力：
具备300%过载能力，适应短时高负载需求。
多轴同步：
可通过DBUS总线（2Mbps）组成最多16轴控制系统，支持电子凸轮、追剪、飞剪等运动控制方案。
2.电力质量监测功能
参数测量：
支持三相系统连续监测，包括电流、电压、有功功率、无功功率、功率因数、频率等。
提供波形分析功能，可诊断电力系统中的畸变问题。
记录与报警：
记录电压下降（sags）和电压峰值（swells）事件，最多存储500次事件数据。
支持4个可编程继电器输出，用于过/欠压、不平衡监测及电容器功率因数校正控制。
3.通信与扩展功能
网络协议：
支持DNP 3.0、TCP/IP、Modbus TCP/IP等协议，兼容工业以太网（如CC-Link、Profibus DP）。
提供10/100Mbps以太网接口，通信距离可达100米。
模块化扩展：
可扩展模拟量输入/输出模块（如热电阻信号输入、标度变换功能）及继电器输出模块，支持16轴定位控制。
4.环境与可靠性
工作温度：
适应-30°C至+70°C环境，防护等级IP20以上。
电源兼容性：
支持24V DC内置电源，兼容宽范围输入电压（如85-264V AC）。
自检与保护：
内置电源自检功能，实时监测输出电压状态；支持过压、过流保护。
二、应用场景
工业自动化：
伺服驱动系统：与PLC、CNC、运动控制器配合，实现多轴同步控制（如插补运动、电子凸轮）。
电力监测：用于钢铁、电力、化工等行业的电能质量分析与故障诊断。
设备控制：
模拟量输入/输出模块：适用于温度、压力等传感器信号处理。
继电器输出模块：控制断路器、电磁阀等执行机构。
通信集成：
作为以太网接口模块，连接PLC与SCADA系统，实现远程监控与数据采集。
1.Core functions and technical parameters
1.Servo drive function
Control accuracy and response:
It supports high-precision control,and the speed and frequency response can reach up to 1.2kHz,which is suitable for scenarios with high requirements for dynamic performance.
Standard 2500 line encoder,17-bit absolute value encoder can be optionally equipped to improve positioning accuracy.
Overload capability:
It has 300%overload capacity to adapt to short-term high load needs.
Multi-axis synchronization:
It can form up to 16-axis control system through the DBUS bus(2Mbps),supporting motion control solutions such as electronic cam,shears,fly shears,etc.
2.Power quality monitoring function
Parameter measurement:
Supports continuous monitoring of three-phase system,including current,voltage,active power,reactive power,power factor,frequency,etc.
Provides waveform analysis function to diagnose distortion problems in power systems.
Recording and Alarm:
Record voltage drop(sags)and voltage peak(swells)events,and store up to 500 event data.
Supports 4 programmable relay outputs for over/undervoltage,unbalance monitoring and capacitor power factor correction control.
3.Communication and extension functions
Network protocol:
Supports DNP 3.0,TCP/IP,Modbus TCP/IP and other protocols,and is compatible with industrial Ethernet(such as CC-Link,Profibus DP).
Provides a 10/100Mbps Ethernet interface,and the communication distance can reach 100 meters.
Modular extension:
Scalable analog input/output modules(such as thermal resistance signal input,scale conversion function)and relay output modules,supporting 16-axis positioning control.
4.Environment and reliability
Operating temperature:
Adaptable to-30°C to+70°C environments,with protection level of IP20 or above.
Power Compatibility:
Supports 24V DC built-in power supply,compatible with wide range of input voltages(such as 85-264V AC).
Self-test and protection:
Built-in power supply self-test function to monitor the output voltage status in real time;supports overvoltage and overcurrent protection.
2.Application scenarios
Industrial automation:
Servo drive system:cooperate with PLC,CNC,and motion controller to realize multi-axis synchronous control(such as interpolation motion,electronic cam).
Power monitoring:used for power quality analysis and fault diagnosis in steel,electricity,chemical and other industries.
Equipment control:
Analog input/output module:suitable for sensor signal processing such as temperature and pressure.
Relay output module:controls actuators such as circuit breakers,solenoid valves,etc.
Communication integration:
As an Ethernet interface module,it connects PLC and SCADA system to realize remote monitoring and data acquisition.
