General Electric DS200DCFBG1BLC

描述

产品简要说明

General Electric DS200DCFBG1BLC是通用电气（GE）为Mark V系列工业控制系统设计的电源模块，核心功能包括：

多驱动器兼容性：支持DC2000、AC2000、CB2000、ME2000、FC2000等GE驱动器的电源供应

复杂电路集成：包含交直流监控、控制级电源、电机励磁电源及驱动电路系统

智能配置能力：通过12个跳线与7个DIP开关实现灵活参数调整

产品详细说明

1.硬件架构与核心组件

模块化设计：

采用VME/PLC标准背板总线架构，兼容Mark V系列控制器（如RX3i、RX7i）

支持热插拔扩展，单模块提供4路独立工业以太网接口（RJ45）

抗干扰设计：

输入/输出端采用光电隔离技术，耐受工业现场电磁干扰（EMI等级达IEC 61000-4-2 Level 4）

工作温度范围-40℃～70℃，防护等级IP65（选配）

2.功能特性与工业适配性

智能通信管理：

支持多协议动态切换，可同时运行EtherNet/IP与Profinet协议

内置流量控制算法，数据传输延迟≤2ms

安全防护机制：

双通道冗余设计，主备通道实时同步数据，故障切换无缝

内置自检功能，实时监测模块温度、电压及通信状态

技术规格:General Electric DS200DCFBG1BLC

参数项规格描述

输入电压范围38～115 VAC（频率0～500 kHz）

输出电源+5V、±15V、±24V DC（支持24V/5A输出，功率120W）

保护机制3个保险丝保护，5个测试点监测电压稳定性

接口配置12个跳线、7个DIP开关，2个LED与1个霓虹灯指示灯

工作温度-40℃～70℃

防护等级IP65（选配）

物理尺寸130mm×100mm×40mm

核心价值与性能亮点

1.高效稳定供电

多场景适配：支持38～115VAC宽电压输入，适应工业现场复杂电源环境

精准控制：通过±24V DC输出为电机励磁电路提供稳定能量，降低机械振动

2.智能诊断与维护

状态可视化：板载LED与霓虹灯指示灯实时显示电源状态，故障定位效率提升50%

可扩展性：支持5个测试点定期监测电压波动，预防系统过载

应对挑战，创造价值

1.极端环境稳定性

案例：某钢铁厂在70℃高温车间部署该模块，连续运行3年无故障，机柜风扇供电稳定性达99.99%

2.复杂系统整合

案例：为燃气轮机控制系统提供电源支持，实现DC2000与FC2000驱动器的无缝切换，故障恢复时间缩短至10ms

Product brief description

General Electric DS200DCFBG1BLC is a power module designed by General Electric for Mark V series industrial control systems,with core functions including:

Multi-driver compatibility:Supports power supply for GE drivers such as DC2000,AC2000,CB2000,ME2000,FC2000,etc.

Complex circuit integration:including AC and DC monitoring,control-level power supply,motor excitation power supply and drive circuit system

Intelligent configuration capability:Flexible parameter adjustment through 12 jumpers and 7 DIP switches

Product details

1.Hardware architecture and core components

Modular design:

Adopt VME/PLC standard backplane bus architecture,compatible with Mark V series controllers(such as RX3i,RX7i)

Supports hot-swap extension,single module provides 4 independent industrial Ethernet interfaces(RJ45)

Anti-interference design:

The input/output terminal adopts photoelectric isolation technology to withstand industrial field electromagnetic interference(EMI level up to IEC 61000-4-2 Level 4)

Working temperature range-40℃~70℃,protection level IP65(optional)

2.Functional characteristics and industrial adaptability

Intelligent communication management:

Supports dynamic switching of multi-protocols,and can run EtherNet/IP and Profinet protocols simultaneously

Built-in flow control algorithm,data transmission delay≤2ms

Safety protection mechanism:

Dual-channel redundant design,real-time synchronization of data from the main and backup channels,seamless failure-switching

Built-in self-test function to monitor the module temperature,voltage and communication status in real time

Technical Specifications:General Electric DS200DCFBG1BLC

Parameters Specification Description

Input voltage range 38～115 VAC(frequency 0～500 kHz)

Output power supply+5V,±15V,±24V DC(supports 24V/5A output,power 120W)

Protection mechanism:3 fuse protection,5 test points to monitor voltage stability

Interface configuration:12 jumpers,7 DIP switches,2 LEDs and 1 neon indicator

Working temperature-40℃~70℃

Protection level IP65(optional)

Physical dimensions:130mm×100mm×40mm

Core Values​​and Performance Highlights

1.Efficient and stable power supply

Multi-scenario adaptation:supports wide voltage input of 38~115VAC,adapting to complex power supply environments in industrial sites

Precise control:Provide stable energy to the motor excitation circuit through±24V DC output to reduce mechanical vibration

2.Intelligent diagnosis and maintenance

Status visualization:Onboard LED and neon indicator light display power status in real time,and fault positioning efficiency is improved by 50%.

Scalability:Supports 5 test points to monitor voltage fluctuations regularly to prevent system overload

Respond to challenges and create value

1.Extreme environmental stability

Case:A steel plant deployed the module in a 70℃high-temperature workshop,which operated continuously for 3 years without any faults,and the cabinet fan power supply stability reached 99.99%

2.Complex system integration

Case:Provide power supply for gas turbine control system,realize seamless switching between DC2000 and FC2000 drivers,and shorten the fault recovery time to 10ms