描述
产品简要说明
GE DS200FCRRG1AJD是通用电气（GE）推出的工业级振动监测模块，专为旋转机械状态监测与故障诊断设计，核心功能包括：
高精度测量：支持加速度、速度、位移三维度振动参数实时采集，频率范围覆盖5Hz至10kHz
智能诊断算法：内置自整定PID控制与模糊逻辑算法，可识别不平衡、不对中、松动等典型机械故障
工业级耐用性：IP65防护等级，耐受-40℃至85℃极端温度，通过IEC 60068-2-64振动冲击测试
产品详细说明
1.硬件架构与核心组件
传感器与信号处理：
配备压电式加速度计，电荷灵敏度达3pC/(m/s²)，支持动态范围0.01-99.9m/s²（加速度）
模拟信号链集成24位ADC，采样率最高10kHz，信噪比优于70dB
通信与扩展接口：
双RS-485/422接口，支持Modbus RTU协议与ASCII指令集
可选配工业以太网模块（需外接），实现TCP/IP协议数据传输
2.功能特性与工业适配性
多模式监测：
振动频谱分析：支持FFT频谱图生成，可识别0.1Hz分辨率的频率成分
趋势分析：内置存储功能，记录24小时历史数据，支持故障模式对比分析
智能诊断逻辑：
预设12种机械故障特征库（如轴承磨损、齿轮啮合故障），诊断准确率超90%
支持自定义报警阈值（加速度、速度、位移三轴独立设置）
技术规格:GE DS200FCRRG1AJD
参数项规格描述
传感器类型压电式加速度计
电荷灵敏度3pC/(m/s²)
测量范围加速度：0.01-99.9m/s²；速度：0.01-9.99cm/s；位移：0.1-999μm
采样率10kHz（可调）
通信协议Modbus RTU、ASCII（支持工业以太网扩展）
工作温度-40℃至85℃
防护等级IP65
抗干扰标准IEC 61000-6-4
DS200TCQCG1AJD
DS200TCQCG1AJD
Product brief description
GE DS200FCRRG1AJD is an industrial-grade vibration monitoring module launched by General Electric(GE),designed for rotary machinery status monitoring and fault diagnosis.The core functions include:
High-precision measurement:supports real-time acquisition of three-dimensional vibration parameters in acceleration,velocity,and displacement,with frequency range covering 5Hz to 10kHz
Intelligent diagnostic algorithm:built-in self-tuning PID control and fuzzy logic algorithm,which can identify typical mechanical failures such as imbalance,misalignment,looseness,etc.
Industrial-grade durability:IP65 protection grade,withstand extreme temperatures of-40℃to 85℃,passed IEC 60068-2-64 vibration shock test
Product details
1.Hardware architecture and core components
Sensor and signal processing:
Equipped with a piezoelectric accelerometer,charge sensitivity up to 3pC/(m/s²),supports dynamic range of 0.01-99.9m/s²(acceleration)
Analog signal chain integrated 24-bit ADC,sampling rate up to 10kHz,signal-to-noise ratio better than 70dB
Communication and extension interface:
Dual RS-485/422 interfaces,supporting Modbus RTU protocol and ASCII instruction set
Optional industrial Ethernet module(need to be external)to realize TCP/IP protocol data transmission
2.Functional characteristics and industrial adaptability
Multimodal monitoring:
Vibration spectrum analysis:supports FFT spectrum pattern generation,which can identify frequency components with 0.1Hz resolution
Trend analysis:Built-in storage function,record 24-hour historical data,and support failure mode comparison analysis
Intelligent diagnostic logic:
Preset 12 mechanical fault characteristic libraries(such as bearing wear and gear meshing fault),and the diagnostic accuracy rate exceeds 90%.
Supports custom alarm thresholds(independent settings of three axes of acceleration,velocity,and displacement)
Technical Specifications:GE DS200FCRRG1AJD
Parameters Specification Description
Sensor type Piezoelectric accelerometer
Charge sensitivity 3pC/(m/s²)
Measuring range Acceleration:0.01-99.9m/s²;Speed:0.01-9.99cm/s;Displacement:0.1-999μm
Sampling rate 10kHz(adjustable)
Communication protocols Modbus RTU,ASCII(supports industrial Ethernet expansion)
Operating temperature-40℃to 85℃
Protection level IP65
Anti-interference standard IEC 61000-6-4
