描述
产品简要说明
GE DS200SHVIG1BHD是通用电气（GE）推出的冗余输出保护模块，专为高可靠性工业场景设计，核心功能包括：
电源阻隔与保护：支持直流线路的过载与短路防护，分断能力高达10kA
标准兼容性：符合IEC898和GB10963国际标准，适配多种极数与电流等级
智能脱扣控制：支持C/D特性脱扣曲线，实现高选择性故障隔离
产品详细说明
1.核心功能与设计特点
电源阻隔技术：
隔离设计：通过物理隔离电路实现电源回路与负载的电气隔离，防止故障扩散
双端子接线：支持母线排与单芯导线混合接线，提升安装灵活性
分断能力：
短路分断：在10kA短路电流下仍能可靠切断电路，保障设备安全
过载保护：C特性（0.5-63A）与D特性（2-40A）脱扣曲线，适配不同负载需求
工业级兼容性：
极数配置：支持1P、1P+N、2P、3P、3P+N、4P（直流型1P/2P）多种接线方式
电流范围：C特性0.5-63A，D特性2-40A，覆盖中小型工业设备需求
2.智能化与扩展性
脱扣控制逻辑：
动态调整：通过微处理器实现电流脱扣值的精准整定，支持远程配置
故障诊断：内置状态监测功能，可通过以太网接口上传故障日志
模块化集成：
VME总线兼容：支持GE PAC系统标准背板，与IC698CRE020冗余CPU无缝对接
双机热备：冗余设计保障系统连续运行，故障切换时间＜50ms
技术规格:GE DS200SHVIG1BHD
参数项规格描述
分断能力10kA（短路电流）
脱扣特性C特性（0.5-63A）、D特性（2-40A）
极数配置1P,1P+N,2P,3P,3P+N,4P（直流型1P,2P）
工作电压直流型：24V/48V/60V；交流型：220V/380V
接线方式双端子设计，支持母线排与单芯导线混合接线
防护等级IP65（工业环境适用）
通信接口VME总线、以太网（支持SRTP TCP/IP、MODBUS TCP/IP）
核心价值与性能亮点
1.高可靠性防护
分断能力：10kA短路分断能力，远超传统断路器（通常≤5kA），适用于大功率设备
冗余设计：双机热备架构保障系统连续运行，避免因单点故障导致停机
2.标准化与兼容性
国际认证：符合IEC898和GB10963标准，适配全球工业场景
模块化扩展：支持GE PAC系统VME总线，可集成第三方I/O模块（如通讯模块、SBC模块）
3.智能控制与维护
远程监控：内置Web服务器，支持通过IE浏览器实时查看模块状态
快速接线：复合槽接线螺钉设计，扭矩大且防松动，接线效率提升30%
.
Product brief description
GE DS200SHVIG1BHD is a redundant output protection module launched by General Electric(GE),designed for high reliability industrial scenarios,with core functions including:
Power blocking and protection:Supports overload and short circuit protection of DC lines,with a breakage capacity of up to 10kA
Standard compatibility:Compatibility with IEC898 and GB10963 international standards,suitable for a variety of pole numbers and current levels
Intelligent tripping control:supports C/D characteristic tripping curve to achieve high selective fault isolation
Product details
1.Core functions and design features
Power blocking technology:
Isolation design:The electrical isolation between the power circuit and the load is achieved through physical isolation circuits to prevent failures from spreading.
Dual-terminal wiring:supports hybrid wiring between busbar and single-core wires,improving installation flexibility
Breakdown ability:
Short circuit breaker:The circuit can be reliably cut off under 10kA short circuit current to ensure the safety of the equipment
Overload protection:Trip curves of C characteristics(0.5-63A)and D characteristics(2-40A)to adapt to different load requirements
Industrial compatibility:
Pole number configuration:Supports multiple wiring methods of 1P,1P+N,2P,3P,3P+N,4P(DC type 1P/2P)
Current range:C characteristics 0.5-63A,D characteristics 2-40A,covering the needs of small and medium-sized industrial equipment
2.Intelligence and scalability
Trip control logic:
Dynamic adjustment:Accurate adjustment of current trip value through microprocessor,supporting remote configuration
Troubleshooting:Built-in status monitoring function,can upload fault logs through the Ethernet interface
Modular integration:
VME bus compatibility:supports GE PAC system standard backplane,seamlessly connected with IC698CRE020 redundant CPU
Dual machine hot backup:redundant design ensures continuous operation of the system,failover time<50ms
Technical Specifications:GE DS200SHVIG1BHD
Parameters Specification Description
Breakout capability 10kA(short circuit current)
Trip characteristics C characteristics(0.5-63A),D characteristics(2-40A)
Pole number configuration 1P,1P+N,2P,3P,3P+N,4P(DC type 1P,2P)
Working voltage DC type:24V/48V/60V;AC type:220V/380V
Wiring method:Dual-terminal design,supports mixed wiring between busbar and single-core wire
Protection level IP65(applicable to industrial environment)
Communication interface VME bus,Ethernet(supports SRTP TCP/IP,MODBUS TCP/IP)
Core Valuesand Performance Highlights
1.High reliability protection
Breakout capability:10kA short circuit breakout capability,far exceeding traditional circuit breakers(usually≤5kA),suitable for high-power equipment
Redundant design:Dual-machine hot standby architecture ensures continuous operation of the system to avoid shutdown due to single point of failure
2.Standardization and compatibility
International certification:complies with IEC898 and GB10963 standards,suitable for global industrial scenarios
Modular expansion:supports GE PAC system VME bus,and can integrate third-party I/O modules(such as communication modules,SBC modules)
3.Intelligent control and maintenance
Remote monitoring:built-in web server,supports real-time viewing of module status through IE browser
Quick wiring:composite slot wiring screw design,large torque and anti-loosening,and wiring efficiency is increased by 30%.
