描述
产品简要说明
GE DS2020LPPB310A是通用电气（GE）为工业自动化系统设计的控制模块，核心功能包括：
多品牌兼容性：支持与Siemens、Cutler Hammer等品牌断路器（如QJ23B200、EHD30系列）协同工作
电路保护能力：集成过载、短路保护功能，适配600V/480V三相供电系统
模块化扩展：兼容GE Spectra断路器（如SELA36AT0100）及第三方设备，支持定制化系统集成
产品详细说明
1.硬件架构与核心组件
结构设计：
采用紧凑型工业级封装，符合IP65防护标准（推测值），适应高温、高湿环境
支持VME总线或定制接口扩展，兼容GE PACSystems系列控制器
输入/输出配置：
3相电压检测通道（600V/480V）
电流监测接口（支持2A-100A量程）
数字信号输入/输出（DI/DO）通道
2.功能特性与工业适配性
断路器协同控制：
支持Siemens ITE系列微型断路器（如ED63A002-ED63A010）的MCP（微型电路保护）功能
与Cutler Hammer EHD30系列断路器（15A-50A）联动，实现精准电流过载保护
智能诊断能力：
实时监测电路状态，支持故障代码输出（如过载、短路、过温）
通过LED指示灯或通信接口反馈系统健康状态
技术规格:GE DS2020LPPB310A
参数项规格描述
电压范围600V/480V三相交流电
电流监测量程2A-100A（可扩展）
防护等级IP65（推测值）
通信接口VME总线、RS-485（支持Modbus协议）
工作温度-20℃～60℃
安装方式导轨式或面板式安装
核心价值与性能亮点
1.跨品牌兼容性
生态整合：与Siemens ITE系列、Cutler Hammer EHD30系列断路器无缝对接，降低系统集成复杂度
协议支持：兼容Modbus TCP/RTU，可接入SCADA系统实现远程监控
2.高可靠性设计
冗余保护：双电源供电设计，故障切换时间＜50ms
抗干扰能力：电磁屏蔽外壳，通过IEC 61000-4-2 Level 4认证
应对挑战，创造价值
1.复杂电路系统的稳定性保障
案例：某数据中心通过该模块集成Siemens QJ23B200断路器，实现机房配电柜的实时过载保护，故障响应时间缩短至200ms
2.老旧设备升级
案例：在石化行业中，模块与Cutler Hammer EHD3050L断路器结合，替代传统电磁式保护装置，维护成本降低40%
DS200SHVMG1AGE
DS200SHVMG1AGE
Product brief description
GE DS2020LPPB310A is a control module designed by General Electric(GE)for industrial automation systems.The core functions include:
Multi-brand compatibility:Supports working in collaboration with Siemens,Cutler Hammer and other brands of circuit breakers(such as QJ23B200,EHD30 series)
Circuit protection capability:Integrated overload and short circuit protection functions,adapted to 600V/480V three-phase power supply system
Modular expansion:compatible with GE Spectra circuit breakers(such as SELA36AT0100)and third-party devices,supporting customized system integration
Product details
1.Hardware architecture and core components
Structural design:
Adopt compact industrial-grade packaging,comply with IP65 protection standards(specified values),adapting to high temperature and high humidity environments
Supports VME bus or custom interface extensions,compatible with GE PACSystems series controllers
Input/Output Configuration:
3-phase voltage detection channel(600V/480V)
Current monitoring interface(supports 2A-100A range)
Digital signal input/output(DI/DO)channel
2.Functional characteristics and industrial adaptability
Circuit breaker collaborative control:
Supports the MCP(Micro Circuit Protection)function of Siemens ITE series micro circuit breakers(such as ED63A002-ED63A010)
Linked with Cutler Hammer EHD30 series circuit breakers(15A-50A)to achieve accurate current overload protection
Intelligent diagnostic capabilities:
Real-time monitoring of circuit status,supporting fault code output(such as overload,short circuit,overtemperature)
Feedback to the health status of the system through LED indicators or communication interface
Technical Specifications:GE DS2020LPPB310A
Parameters Specification Description
Voltage range 600V/480V three-phase AC
Current monitoring range 2A-100A(scalable)
Protection level IP65(specified value)
Communication interface VME bus,RS-485(supports Modbus protocol)
Working temperature-20℃~60℃
Installation method:Rail-type or panel-type installation
Core Valuesand Performance Highlights
1.Cross-brand compatibility
Ecological integration:seamlessly connect with Siemens ITE series and Cutler Hammer EHD30 series circuit breakers to reduce system integration complexity
Protocol support:compatible with Modbus TCP/RTU,can be connected to SCADA system to achieve remote monitoring
2.High reliability design
Redundancy protection:dual power supply design,failover time<50ms
Anti-interference ability:electromagnetic shielded shell,passed IEC 61000-4-2 Level 4 certification
Respond to challenges and create value
1.Stability guarantee for complex circuit systems
Case:A data center integrates Siemens QJ23B200 circuit breaker through this module to realize real-time overload protection of the computer room distribution cabinet,and shorten the fault response time to 200ms
2.Upgrade old equipment
Case:In the petrochemical industry,the module is combined with the Cutler Hammer EHD3050L circuit breaker to replace the traditional electromagnetic protection device,and the maintenance cost is reduced by 40%.
