描述
一、产品概述
YASKAWA JAMSC-C8160是安川电机（YASKAWA）推出的工业自动化控制模块，属于Freelance 800F过程控制系统的核心组件，专为复杂工业环境设计。其核心功能是实现逻辑控制、数据处理与通信管理，支持模块化扩展和高可靠性运行，适用于过程控制、机器人集成及分布式系统。
二、核心功能与技术参数
1.控制架构
系统结构：
操作员级：支持双屏显示操作，运行于Windows系统，集成归档、报警、趋势分析等功能。
过程控制级：由AC800F控制器和S800分布式I/O站组成，支持冗余配置（CPU冗余、总线模块冗余）。
全局数据库：统一管理现场设备、过程控制站及操作员站的数据，确保一致性并降低通信成本。
2.处理能力
处理器：32位超标量RISC架构（如Inb80960HT25/75），运算速度150MIPS。
存储容量：4M Flash EPROM+4-16M RAM，支持实时多任务嵌入式操作系统（pSOS+）。
控制周期：最快5ms，I/O扫描速度模拟量<20ms，开关量<5ms。
3.I/O与扩展
I/O点数：
模块化设计：支持S800 I/O站扩展，单站最多12个I/O卡件，适用于分散式安装。
信号类型：模拟量（精度≥0.1%）、数字量（继电器隔离输出，DC24V/5A）。
通信接口：
现场总线：支持PROFIBUS-DP/PA，通过GSD文件集成设备。
工业以太网：支持OPC UA、DCOM/ActiveX技术，实现远程监控与数据交互。
4.编程与开发
编程语言：符合IEC 61131-3标准，支持功能块图（FBD）、梯形图（LD）、指令表（IL）、顺控图（SFC）、结构文本（ST）。
功能块库：内置宽泛标准库，支持用户自定义功能块及图形符号面板设计。
软件工具：ControlBuilderF工程师站，支持便携设备（如笔记本）远程组态。
5.环境与可靠性
工作温度：-40°C至85°C（宽温域设计）。
防护等级：IP65/IP67（部分型号），适应粉尘、潮湿、振动环境。
冗余配置：CPU、总线模块可冗余，提升系统可用性。
1.Product Overview
YASKAWA JAMSC-C8160 is an industrial automation control module launched by Yaskawa Motor(YASKAWA).It is a core component of the Freelance 800F process control system and is specially designed for complex industrial environments.Its core function is to realize logic control,data processing and communication management,support modular expansion and high-reliability operation,and is suitable for process control,robot integration and distributed systems.
2.Core functions and technical parameters
1.Control architecture
System structure:
Operator level:supports dual-screen display operation,runs on Windows system,and integrates archiving,alarm,trend analysis and other functions.
Process control level:consists of AC800F controller and S800 distributed I/O station,supporting redundant configuration(CPU redundancy,bus module redundancy).
Global database:Unified management of data from field equipment,process control stations and operator stations to ensure consistency and reduce communication costs.
2.Processing capability
Processor:32-bit superscalar RISC architecture(such as Inb80960HT25/75),computing speed of 150MIPS.
Storage capacity:4M Flash EPROM+4-16M RAM,supports real-time multi-tasking embedded operating system(pSOS+).
Control cycle:fastest 5ms,I/O scanning speed analog quantity<20ms,switching quantity<5ms.
3.I/O and Extension
I/O points:
Modular design:supports S800 I/O station expansion,with up to 12 I/O cards per station,suitable for distributed installation.
Signal type:analog quantity(accuracy≥0.1%),digital quantity(relay isolation output,DC24V/5A).
Communication interface:
Fieldbus:Supports PROFIBUS-DP/PA,and integrates devices through GSD files.
Industrial Ethernet:supports OPC UA,DCOM/ActiveX technologies to realize remote monitoring and data interaction.
4.Programming and Development
Programming language:Comply with IEC 61131-3 standards,supports functional block diagram(FBD),ladder diagram(LD),instruction table(IL),sequence diagram(SFC),and structural text(ST).
Function block library:Built-in broad standard library,supports user-defined function blocks and graphic symbol panel design.
Software tool:ControlBuilderF Engineer Station,supports remote configuration of portable devices(such as laptops).
5.Environment and reliability
Operating temperature:-40°C to 85°C(wide temperature range design).
Protection level:IP65/IP67(some models),adapted to dust,humidity and vibration environments.
Redundant configuration:CPU and bus modules can be redundant to improve system availability.
