描述
LAND M2300/1100C-V技术数据解析
一、核心功能与定位
产品类型
高温红外测温仪：专为工业高温环境设计，适用于金属加工、玻璃熔融、热处理等场景，支持非接触式温度测量。
核心功能
高精度测温：通过红外辐射原理测量目标温度，响应速度快，稳定性强。
多场景适配：支持短焦距与标准焦距切换，适用于不同距离的目标测量。
二、关键参数
参数规格值引用来源
温度范围300°C至1100°C、
波长1.6微米（单波长模式）、
响应时间5 ms（0-95%）
目标直径≥98%的标度影像能量，最小目标直径3.5 mm
视域比100:1（标准焦距）
焦距范围标准焦距：0.5 m至无穷远；短焦可变：0.35 m至1.0 m
精度与重复性绝对精度≤±0.25%+1 K；重复性≤1°C
稳定性温度漂移≤0.2°C/环境温度变化；时间漂移≤2°C/年
防护等级IP54（防尘防溅水）
环境温度工作温度：-10°C至60°C；存储温度：0°C至50°C
湿度适应性0%-99%相对湿度（无冷凝）
机械振动抗震性能：3G任意轴，频率范围10-300 Hz
三、光学与安装特性
光学设计
瞄准方式：通过透镜实现6°视场角瞄准，支持激光或LED光斑辅助定位。
镜头配置：可选标准镜头（0.5 m至无穷远）或短焦镜头（0.35 m至1.0 m）。
安装与接口
安装方式：支持工业标准安装，适用于紧凑或复杂环境。
信号输出：未明确标注，但同类产品通常支持模拟信号（如4-20 mA）或数字接口（如RS-485）。
四、应用场景
金属加工：金属熔炼、锻造、轧制、退火等高温工艺监测。
玻璃制造：熔融玻璃温度控制、成型过程监控。
化工与能源：反应炉温度、燃烧室监测。
半导体与电子：晶圆炉、波峰焊温度控制。
LAND M2300/1100C-V Technical data analysis
1.Core functions and positioning
Product Type
High temperature infrared thermometer:specially designed for industrial high temperature environments,suitable for metal processing,glass melting,heat treatment and other scenarios,and supports contactless temperature measurement.
Core functions
High-precision temperature measurement:The target temperature is measured through the principle of infrared radiation,with fast response speed and strong stability.
Multi-scene adaptation:supports short focal length and standard focal length switching,suitable for target measurements of different distances.
2.Key parameters
Parameter Specification Value Quote Source
Temperature range 300°C to 1100°C,
Wavelength:1.6 microns(single wavelength mode),
Response time 5 ms(0-95%)
Target diameter≥98%scale image energy,minimum target diameter 3.5 mm
Sight ratio 100:1(standard focal length)
Focal length range Standard focal length:0.5 m to infinity;short focal variable:0.35 m to 1.0 m
Accuracy and repeatability Absolute accuracy≤±0.25%+1 K;repeatability≤1°C
Stability Temperature drift≤0.2°C/ambient temperature change;time drift≤2°C/year
Protection level IP54(dust-proof and splash-proof)
Ambient temperature Operating temperature:-10°C to 60°C;Storage temperature:0°C to 50°C
Humidity adaptability 0%-99%relative humidity(no condensation)
Mechanical vibration,shock resistance:3G any axis,frequency range 10-300 Hz
3.Optical and installation characteristics
Optical design
Attempting method:Aiming 6°field of view angle through the lens,supporting laser or LED spot assisted positioning.
Lens configuration:Optional standard lens(0.5 m to infinity)or short focal lens(0.35 m to 1.0 m).
Installation and Interface
Installation method:Supports industry-standard installation,suitable for compact or complex environments.
Signal output:Not explicitly marked,but similar products usually support analog signals(such as 4-20 mA)or digital interfaces(such as RS-485).
IV.Application scenarios
Metal processing:high-temperature process monitoring such as metal smelting,forging,rolling,and annealing.
Glass manufacturing:temperature control of molten glass,molding process monitoring.
Chemical and energy:reactor temperature and combustion chamber monitoring.
Semiconductors and electronics:wafer furnace,wave soldering temperature control.
