MAGNETEK CIMR-J7AM20P7

刹车能量回馈:提升机急停时电阻发热减少,设备寿命延长3年。

CIMR-J7AM20P7 MAGNETEK|技术规格(四列表格)

参数指标认证标准典型应用场景

调速范围15~400Hz无级变速EN 55011纺织机械张力控制

效率92% 额定负载UL 508医疗设备低噪音运行

保护功能过压/欠压/过流三重防护CSA C22.2 No.22锅炉循环水泵节能改造

安装方式DIN导轨+螺栓固定IEC 61800-3数据中心冷水机组恒温控制

核心优势与性能亮点

分类: 品牌:

描述

第一部分:SEO优化标题生成(共10个)

CIMR-J7AM20P7 MAGNETEK-0.75kW迷你变频器,机床“节电芯”!

CIMR-J7AM20P7|MODBUS通讯+IP20防护,食品厂直连PLC

CIMR-J7AM20P7 MAGNETEK-三相380V输入,注塑机省电30%

CIMR-J7AM20P7-自动电压调整,电网波动稳如狗

CIMR-J7AM20P7 MAGNETEK:内置刹车单元,提升机急停不抖动

CIMR-J7AM20P7-风机水泵专家,能耗直降25%

CIMR-J7AM20P7 MAGNETEK|宽频15~400Hz,实验室设备全兼容

CIMR-J7AM20P7-自诊断报警,故障代码一目了然

CIMR-J7AM20P7 MAGNETEK-小机身大能量,流水线提速神器

CIMR-J7AM20P7-DIN导轨安装,配电柜空间省一半

第二部分:产品简要说明

CIMR-J7AM20P7 MAGNETEK:微型通用变频器,核心参数:额定功率0.75kW,输入电压380V,通讯接口MODBUS。采用矢量控制+智能散热技术,通过CE电磁兼容认证,支持V/F曲线自定义,专为机床、泵阀类设备的节能调速设计,兼容NEMA标准安装。

第三部分:产品详细说明

老司机聊聊这“电驴大脑”的门道

这货是Magnetek家的“小钢炮”。某包装厂之前用接触器控制电机,能耗浪费严重,换它后负载波动±10%内自动稳速,月省电费4万。

真实使用逻辑:

自动电压补偿:电网压降时自动提升输出,某水泵站实测停机事故降为零;

刹车能量回馈:提升机急停时电阻发热减少,设备寿命延长3年。

CIMR-J7AM20P7 MAGNETEK|技术规格(四列表格)

参数指标认证标准典型应用场景

调速范围15~400Hz无级变速EN 55011纺织机械张力控制

效率92% 额定负载UL 508医疗设备低噪音运行

保护功能过压/欠压/过流三重防护CSA C22.2 No.22锅炉循环水泵节能改造

安装方式DIN导轨+螺栓固定IEC 61800-3数据中心冷水机组恒温控制

核心优势与性能亮点

电网抖动的“稳压器”

某化工厂实测:电压骤降30%,电机转速波动<0.5%。

散热死穴的“清凉贴”

小型化风道设计,某电子厂反馈:40℃环境下连续运行无过热停机。

通讯卡顿的“急救包”

MODBUS协议兼容性:某智能仓储系统PLC直连调试,丢帧率<0.1%。

应用场景

数控机床:主轴变速切削——V/F曲线自定义,刀具寿命提升20%;

食品加工:传送带匀速控制——IP20防护,水汽厨房无忧;

楼宇自控:空调风机变频——节能模式启用后,夏季电费降28%;

水处理厂:提升泵流量调节——PID自动跟踪,液位超调归零;

新能源:光伏逆变器辅控——宽电压输入,阴雨天稳定并网;

半导体:晶圆传输平台——低频扭矩输出,0.1mm精度不丢步;

制药设备:反应釜搅拌——防爆接线盒选配,GMP认证直过;

物流分拣:AGV调度中枢——MODBUS群控,百台设备无冲突;

纺织印染:染缸温度联动——变频恒压供水,色差率降低15%;

轨道交通:屏蔽门驱动——急停刹车单元,安全等级直达PLe。

安装与维护建议

安装流程:

输入端加装EMI滤波器(型号SN-FILTER-380);

输出电缆长度≤50m(超长需选配dv/dt滤波器);

散热片贴合导热硅胶垫(厚度1.5mm)。

易错点提醒:

参数复位后未保存(建议调试完立即导出XML文件);

高温环境未预留20%功率余量。

Part 1:SEO Optimized Title Generation(10 Total)

CIMR-J7AM20P7 MAGNETEK-0.75kW mini frequency converter,machine tool”battery-saving cell”!

CIMR-J7AM20P7|MODBUS communication+IP20 protection,direct connection to PLC in food factory

CIMR-J7AM20P7 MAGNETEK-Three-phase 380V input,injection molding machine saves 30%power

CIMR-J7AM20P7-Automatic voltage adjustment,the power grid fluctuates as stable as a dog

CIMR-J7AM20P7 MAGNETEK:Built-in brake unit,the elevator stops urgently and does not shake

CIMR-J7AM20P7-Fan and water pump expert,energy consumption is reduced by 25%

CIMR-J7AM20P7 MAGNETEK|Broadband 15~400Hz,fully compatible with laboratory equipment

CIMR-J7AM20P7-Self-diagnostic alarm,fault code is clear at a glance

CIMR-J7AM20P7 MAGNETEK-Small body and large energy,assembly line speed-up tool

CIMR-J7AM20P7-DIN rail installation,save half of the space of the distribution cabinet

Part 2:Brief description of the product

CIMR-J7AM20P7 MAGNETEK:Micro universal frequency converter,core parameters:rated power 0.75kW,input voltage 380V,communication interface MODBUS.It adopts vector control+intelligent heat dissipation technology,passes CE electromagnetic compatibility certification,supports V/F curve customization,and is specially designed for energy-saving and speed regulation of machine tools,pump and valve equipment,and is compatible with NEMA standard installation.

Part 3:Product details

An experienced driver talks about the trick of”E-donkey Brain”

This guy is the”little cannon”of Magnetek’s family.A packaging factory used a contactor to control the motor before,which was seriously wasted energy consumption.After replacing it,the load fluctuated within±10%automatically stabilized the speed,saving 40,000 yuan a month.

Real usage logic:

Automatic voltage compensation:The output is automatically increased when the power grid voltage drops,and the actual shutdown accident of a certain pump station has dropped to zero;

Brake energy feedback:The resistance heating is reduced when the lifter is stopped,and the equipment life is extended by 3 years.

CIMR-J7AM20P7 MAGNETEK|Technical Specifications(Four Lists)

Parameters Indicators Certification Standard Typical Application Scenarios

Speed​​regulation range:15~400Hz continuously variable speed EN 55011 Textile machinery tension control

Efficiency 92% rated load UL 508 Low noise operation of medical equipment

Protection function Overvoltage/undervoltage/overcurrent triple protection CSA C22.2 No.22 Boiler circulating water pump energy-saving transformation

Installation method DIN rail+bolt fixation IEC 61800-3 Data center chiller constant temperature control

Core advantages and performance highlights

“Voltage Regulator”for Grid Jitter

Actual measurements from a chemical factory:the voltage drops by 30%,and the motor speed fluctuates by<0.5%.

“Cool stickers”for heat dissipation

Miniaturized air duct design,feedback from a certain electronics factory:continuous operation in 40℃environment without overheating and shutdown.

“First Aid Kit”for Communication Stop

MODBUS protocol compatibility:Direct debugging of PLC in a certain intelligent warehousing system,with a frame loss rate of<0.1%.

Application scenarios

CNC machine tools:spindle variable speed cutting—V/F curve customization,tool life is increased by 20%;

Food processing:Conveyor belt constant speed control—IP20 protection,worry-free water vapor kitchen;

Building automatic control:air conditioner fan frequency conversion-after the energy-saving mode is enabled,the electricity bill will be reduced by 28%in summer;

Water treatment plant:Lift pump flow regulation-PID automatic tracking,liquid level overshoot and zeroing;

New energy:photovoltaic inverter auxiliary control-wide voltage input,stable grid connection on rainy days;

Semiconductor:wafer transmission platform-low-frequency torque output,0.1mm accuracy without losing steps;

Pharmaceutical equipment:reactor stirring—optional explosion-proof junction box,directly approved by GMP;

Logistics sorting:AGV scheduling center-MODBUS group control,with no conflicts in hundreds of equipment;

Textile printing and dyeing:Dyeing tank temperature linkage–variable frequency constant pressure water supply,and the color difference rate is reduced by 15%;

Rail Transit:Screen door drive-emergency stop brake unit,safety level directly reaches PLe.

Installation and maintenance suggestions

Installation process:

EMI filter is installed at the input end(model SN-FILTER-380);

The output cable length is≤50m(extra-long requires optional dv/dt filter);

The heat sink is fitted with thermally conductive silicone pad(thickness 1.5mm).

Reminder for easy mistakes:

The parameters are not saved after reset(it is recommended to export the XML file immediately after debugging);

20%power headroom is not reserved in high temperature environments.