描述
产品简要说明
MAGNETEK DRIVE GPD515C-B015是一款面向工业泵、风机及传送带系统的高性能变频驱动器，核心特性包括：
节能优化：内置自适应V/F控制算法，能耗降低15%-30%
多场景适配：支持开环/闭环控制，兼容永磁同步电机与异步电机
宽电压输入：100-480V AC（三相），适应复杂电网环境
产品详细说明
1.核心控制技术
智能节能模式：
动态负载检测：通过电流波形分析自动调节输出功率，减少空载损耗
能量回馈功能：支持将制动能量回注电网（需外接回馈单元）
精准控制算法：
矢量控制模式：转矩响应时间≤5ms，转速精度±0.1%
软启动/软停车：支持可编程曲线，降低机械冲击
2.硬件设计特性
电源架构：
双电源冗余设计：支持热插拔切换（切换时间≤20ms）
宽电压输入范围：100-480V AC（±10%波动容忍）
环境适应性：
防护等级IP65，适应粉尘、油污环境
工作温度范围-20℃至55℃（可选配-30℃低温套件）
技术规格:MAGNETEK DRIVE GPD515C-B015
参数项规格描述
输出功率15kW（额定值）
通信接口1×EtherCAT、1×RS-485、1×Modbus TCP
控制输入4个数字输入（DC 24V）、2个模拟输入（0-10V/4-20mA）
输出接口2个继电器输出、1个故障报警输出
存储容量8MB Flash（固件存储）+256KB RAM（运行数据）
防护等级IP65（标准）/IP67（选配）
Product brief description
MAGNETEK DRIVE GPD515C-B015 is a high-performance variable frequency driver for industrial pumps,fans and conveyor belt systems.The core features include:
Energy saving optimization:built-in adaptive V/F control algorithm,energy consumption reduction by 15%-30%
Multi-scenario adaptation:supports open-loop/closed-loop control,compatible with permanent magnet synchronous motors and asynchronous motors
Wide voltage input:100-480V AC(three-phase),adapted to complex grid environments
Product details
1.Core control technology
Intelligent energy-saving mode:
Dynamic load detection:Automatically adjust the output power through current waveform analysis to reduce no-load loss
Energy feedback function:Supports the brake energy back to the power grid(external feedback unit is required)
Precise control algorithm:
Vector control mode:torque response time≤5ms,speed accuracy±0.1%
Soft start/soft parking:Supports programmable curves to reduce mechanical impact
2.Hardware design features
Power architecture:
Dual power supply redundant design:support hot-swap switching(switching time≤20ms)
Wide voltage input range:100-480V AC(±10%fluctuation tolerance)
Environmental adaptability:
Protection level IP65,adapt to dust and oily environment
Operating temperature range-20℃to 55℃(optional-30℃low temperature kit)
Technical Specifications:MAGNETEK DRIVE GPD515C-B015
Parameters Specification Description
Output power 15kW(rated value)
Communication interface 1×EtherCAT,1×RS-485,1×Modbus TCP
Control inputs 4 digital inputs(DC 24V),2 analog inputs(0-10V/4-20mA)
Output interface 2 relay outputs,1 fault alarm output
Storage capacity 8MB Flash(firmware storage)+256KB RAM(running data)
Protection level IP65(standard)/IP67(optional)
