Magnetek MG3-1G-1G-PM

产品简要说明

Magnetek MG3-1G-1G-PM是一款集成电力转换与通信功能的工业级电源模块,核心特性包括:

双端口以太网交换器:支持10/100 Mbps通信,支持Modbus/TCP协议

多通道I/O扩展:16位模拟输入、数字输入/输出,支持差分输入与隔离保护

宽电压输入:12-36 VDC供电,适应复杂工业环境

产品详细说明

1.硬件架构设计

电源模块:

输入电压范围:12-36 VDC(额定24 VDC)

功耗:典型130 mA(24 VDC)

隔离保护:1.5 kV磁隔离(以太网接口)

分类: 品牌:

描述

产品简要说明

Magnetek MG3-1G-1G-PM是一款集成电力转换与通信功能的工业级电源模块,核心特性包括:

双端口以太网交换器:支持10/100 Mbps通信,支持Modbus/TCP协议

多通道I/O扩展:16位模拟输入、数字输入/输出,支持差分输入与隔离保护

宽电压输入:12-36 VDC供电,适应复杂工业环境

产品详细说明

1.硬件架构设计

电源模块:

输入电压范围:12-36 VDC(额定24 VDC)

功耗:典型130 mA(24 VDC)

隔离保护:1.5 kV磁隔离(以太网接口)

通信单元:

内置2端口以太网交换器,支持RJ45接口

支持Modbus/TCP、TCP/IP、UDP等协议

2.核心功能特性

模拟输入:

差分输入模式,支持0-10 VDC/4-20 mA信号

分辨率16位,采样率12次/秒

输入抗阻≥10 MΩ,内置120Ω电流输入电阻

数字I/O:

支持NPN/PNP干接点与湿接点输入

数字输出模式:DO或脉冲输出(脉冲宽度1 ms/500 Hz)

过压/过流保护(45 VDC/600 mA)

技术规格:Magnetek MG3-1G-1G-PM

参数项规格描述

以太网接口2 x 10/100 Mbps switch ports,RJ45(1.5 kV磁隔离)

模拟输入通道4路(16位分辨率,0-10 VDC/4-20 mA)

数字输入通道8路(NPN/PNP干接点/湿接点,隔离保护3 kV)

数字输出通道4路(DO/脉冲输出,隔离保护3 kV)

工作温度-10℃至60℃

防护等级IP65(可选IP67)

Product brief description

Magnetek MG3-1G-1G-PM is an industrial-grade power module that integrates power conversion and communication functions.The core features include:

Dual-port Ethernet switch:Supports 10/100 Mbps communication,supports Modbus/TCP protocol

Multi-channel I/O expansion:16-bit analog input,digital input/output,support differential input and isolation protection

Wide voltage input:12-36 VDC power supply,adapted to complex industrial environments

Product details

1.Hardware architecture design

Power module:

Input voltage range:12-36 VDC(rated 24 VDC)

Power consumption:Typical 130 mA(24 VDC)

Isolation protection:1.5 kV magnetic isolation(Ethernet interface)

Communication unit:

Built-in 2-port Ethernet switch,supports RJ45 interface

Support Modbus/TCP,TCP/IP,UDP and other protocols

2.Core functional characteristics

Analog input:

Differential input mode,support 0-10 VDC/4-20 mA signal

16-bit resolution,sampling rate 12 times per second

Input resistance≥10 MΩ,built-in 120Ωcurrent input resistor

Digital I/O:

Supports NPN/PNP dry contact and wet contact input

Digital output mode:DO or pulse output(pulse width 1 ms/500 Hz)

Overvoltage/overcurrent protection(45 VDC/600 mA)

Technical Specifications:Magnetek MG3-1G-1G-PM

Parameters Specification Description

Ethernet interface 2 x 10/100 Mbps switch ports,RJ45(1.5 kV magnetic isolation)

Analog input channel 4 channels(16-bit resolution,0-10 VDC/4-20 mA)

Digital input channel 8 channels(NPN/PNP dry contact/wet contact,isolation protection 3 kV)

Digital output channel 4 channels(DO/pulse output,isolation protection 3 kV)

Operating temperature-10℃to 60℃

Protection level IP65(optional IP67)