描述
一、产品可能性分析
1.破碎机配件
可能型号：Valm-818413可能是美卓旗下Nordberg系列（如GP、HP、C系列）圆锥破碎机或GP系列颚式破碎机的关键部件。
典型部件：
破碎壁/轧臼壁：圆锥破碎机的核心耐磨件，直接接触物料进行破碎。
动锥/定锥衬板：保护破碎机主体，延长使用寿命。
锁紧缸/调整环：用于调整排料口尺寸或固定破碎腔。
传动轴/齿轮组：传递动力，驱动破碎机运转。
2.筛分设备配件
可能应用：美卓的振动筛（如CVB系列、MF系列）或给料机（如VF系列）的筛网、激振器或弹簧组件。
典型部件：
聚氨酯筛网：耐磨、抗腐蚀，适用于湿式筛分。
激振器总成：提供振动动力，确保筛分效率。
支撑弹簧：隔离振动，减少设备噪音。
3.输送设备配件
可能应用：美卓的皮带输送机或斗式提升机的托辊、滚筒或皮带清扫器。
典型部件：
缓冲托辊：减少物料冲击，保护皮带。
驱动滚筒：传递动力，驱动皮带运行。
皮带清扫器：清除皮带表面残留物料，防止打滑。
4.液压/润滑系统配件
可能应用：美卓设备的液压站、润滑泵或油缸的密封件、过滤器或传感器。
典型部件：
液压密封圈：防止液压油泄漏，确保系统压力稳定。
润滑泵滤芯：过滤润滑油中的杂质，保护轴承和齿轮。
压力传感器：监测系统压力，实现自动控制。
5.电气控制系统配件
可能应用：美卓设备的PLC模块、变频器或传感器（如温度、振动传感器）。
典型部件：
PLC输入/输出模块：连接现场设备与控制系统。
变频器：调节电机转速，实现节能控制。
振动传感器：监测设备运行状态，预防故障。
二、关键参数推测（以破碎机配件为例）
参数类别描述
型号Metso Valm-818413
适用设备Nordberg GP500圆锥破碎机（示例，需确认）
材质高锰钢（Mn18Cr2）或合金钢（示例）
重量约50~200kg（依部件大小而定）
尺寸直径800mm×高度300mm（示例，需实测）
硬度HRC 50~55（耐磨层）
兼容性需与Metso原厂配件互换
认证CE、ISO 9001
三、典型应用场景
1.矿山行业
铁矿石破碎：在圆锥破碎机中作为破碎壁，将大块铁矿石破碎至合适粒度。
铜矿筛分：在振动筛中作为聚氨酯筛网，分离铜矿精粉与尾矿。
2.建材行业
石灰石破碎：在颚式破碎机中作为动锥衬板，破碎石灰石原料。
砂石骨料生产：在冲击式破碎机中作为转子体，生产高品质机制砂。
3.冶金行业
钢渣处理：在反击式破碎机中作为板锤，破碎钢渣并回收金属。
铝土矿筛分：在圆振动筛中作为筛框，分离铝土矿与杂质。
1.Product Possibility Analysis
1.Crusher Accessories
Possible Model:Valm-818413 may be a key component of Metso’s Nordberg series(such as GP,HP,C series)cone crusher or GP series jaw crusher.
Typical Components:
Crushing Wall/Mortar Wall:The core wear-resistant part of the cone crusher,which directly contacts the material for crushing.
Moving Cone/Fixed Cone Liner:Protect the main body of the crusher and extend its service life.
Locking Cylinder/Adjusting Ring:Used to adjust the size of the discharge port or fix the crushing chamber.
Drive Shaft/Gear Set:Transmit power to drive the crusher to operate.
2.Screening Equipment Accessories
Possible Applications:Screen,Vibrator or Spring Assembly of Metso’s Vibrating Screen(such as CVB Series,MF Series)or Feeder(such as VF Series).
Typical Components:
Polyurethane Screen:Wear-resistant and corrosion-resistant,suitable for wet screening.
Vibrator Assembly:Provides vibration power to ensure screening efficiency.
Support spring:Isolate vibration and reduce equipment noise.
3.Conveying equipment accessories
Possible applications:rollers,drums or belt cleaners of Metso’s belt conveyors or bucket elevators.
Typical components:
Buffer rollers:Reduce material impact and protect belts.
Drive rollers:Transmit power and drive belts.
Belt cleaners:Remove residual materials on the belt surface to prevent slipping.
4.Hydraulic/lubrication system accessories
Possible applications:Seals,filters or sensors of hydraulic stations,lubrication pumps or cylinders of Metso equipment.
Typical components:
Hydraulic seals:Prevent hydraulic oil leakage and ensure stable system pressure.
Lubrication pump filter:Filter impurities in lubricating oil to protect bearings and gears.
Pressure sensors:Monitor system pressure and achieve automatic control.
5.Electrical control system accessories
Possible applications:PLC modules,frequency converters or sensors(such as temperature and vibration sensors)of Metso equipment.
Typical components:
PLC input/output modules:Connect field equipment with the control system.
Frequency converter:adjust the motor speed to achieve energy-saving control.
Vibration sensor:monitor the operating status of the equipment and prevent failures.
2.Key parameter speculation(taking crusher accessories as an example)
Parameter category Description
Model Metso Valm-818413
Applicable equipment Nordberg GP500 cone crusher(example,to be confirmed)
Material High manganese steel(Mn18Cr2)or alloy steel(example)
Weight About 50~200kg(depending on the size of the component)
Dimensions Diameter 800mm×height 300mm(example,to be measured)
Hardness HRC 50~55(wear-resistant layer)
Compatibility Need to be interchangeable with Metso original accessories
Certification CE,ISO 9001
3.Typical application scenarios
1.Mining industry
Iron ore crushing:As a crushing wall in the cone crusher,large pieces of iron ore are crushed to a suitable particle size.
Copper ore screening:As a polyurethane screen in the vibrating screen to separate copper ore concentrate and tailings.
2.Building materials industry
Limestone crushing:used as a moving cone liner in a jaw crusher to crush limestone raw materials.
Sand and gravel aggregate production:used as a rotor in an impact crusher to produce high-quality machine-made sand.
3.Metallurgical industry
Steel slag processing:used as a plate hammer in an impact crusher to crush steel slag and recover metal.
Bauxite screening:used as a screen frame in a circular vibrating screen to separate bauxite from impurities.
