描述
OMRON C200H-OD219产品详情
一、基本信息
品牌：OMRON（欧姆龙，全球自动化控制与电子设备制造商，专注于PLC、传感器、机器人等领域）
型号：C200H-OD219
类型：C200H系列PLC数字量输出模块（Digital Output Module）
用途：作为OMRON C200H可编程逻辑控制器（PLC）的扩展I/O模块，用于控制工业现场的数字量负载（如继电器、电磁阀、指示灯等），广泛应用于机械制造、包装、食品饮料、水处理等自动化场景。
二、技术规格
1.核心功能
输出类型与通道：
输出信号：16通道晶体管输出（Transistor Output），支持24VDC负载，每通道最大负载电流0.5A（典型值），总负载电流≤8A（模块级）。
输出特性：
响应时间：≤1ms（ON/OFF切换），满足高速控制需求（如分拣机、包装机）。
隔离方式：通道间光电隔离，隔离电压≥500V（通道间/通道对地），避免信号干扰。
控制模式：
支持源型输出（Source Output）或漏型输出（Sink Output）（通过跳线或软件配置），兼容不同负载类型。
提供公共端（COM）设计，支持多负载并联或独立控制。
2.硬件参数
接口与连接：
接线端子：采用可拆卸弹簧端子（支持带电插拔），接线方便且牢固，适用于频繁维护场景。
通信接口：通过C200H总线与PLC主控单元连接，支持扩展至64个I/O模块（最大I/O点数2048点）。
电源要求：24VDC（±10%），典型功耗<2W（满载时），支持冗余电源输入（需选配）。
防护与可靠性：
防护等级：IP20（控制柜内安装），外壳材质为阻燃塑料（UL94 V-0），抗电磁干扰（EMC）符合IEC 61131-2标准。
环境适应性：
工作温度：-10℃至+55℃（标准版），-25℃至+70℃（宽温版可选）。
抗振动：符合IEC 60068-2-6标准（10-500Hz，5G）。
3.性能指标
诊断与自检：
内置自诊断功能，可检测通道故障（开路、短路、过载）、电源异常，并通过LED指示灯或PLC报警。
支持过载保护（每通道独立保险丝或电子保护电路），防止负载短路损坏模块。
安全认证：
符合CE、UL、cUL等国际认证，满足全球工业安全标准。
可选配功能安全版本（如C200H-OD219-F），支持IEC 61508 SIL 2认证，适用于安全仪表系统（SIS）。
三、应用领域
机械制造
数控机床控制：通过C200H-OD219控制主轴电机启停、冷却液电磁阀，实现高精度加工。
机器人分拣线：控制气缸、真空吸盘等执行器，实现高速分拣与包装。
食品饮料
灌装线控制：控制灌装阀开关、传送带启停，确保灌装精度与生产效率。
杀菌设备：控制紫外线灯、蒸汽阀，满足食品卫生安全要求。
水处理
泵站控制：控制水泵启停、阀门开度，实现自动化水处理流程。
水质监测：连接水质传感器（如pH计、浊度计），触发报警或联锁控制。
物流与仓储
自动分拣系统：控制分拣机滚筒、滑槽电磁阀，实现包裹快速分拣。
立体仓库：控制堆垛机、输送线，优化仓储效率。
四、产品优势
高密度与高可靠性
16通道输出：单模块集成16路负载控制，减少硬件数量与布线成本。
光电隔离设计：通道间隔离电压≥500V，避免信号干扰与负载故障扩散。
灵活性与扩展性
源型/漏型输出兼容：通过跳线或软件配置，适配不同负载类型（如PNP/NPN传感器）。
C200H总线扩展：支持最多64个I/O模块，系统规模可灵活扩展。
易用性与维护性
弹簧端子设计：支持带电插拔，减少维护停机时间。
LED状态指示：每通道独立LED，快速定位故障点。
COM0003 2RAA005844A0006A
COM0003 2RAA005844A0006A
OMRON C200H-OD219 Product Details
I.Basic Information
Brand:OMRON(OMRON,a global manufacturer of automation control and electronic equipment,focusing on PLC,sensors,robots and other fields)
Model:C200H-OD219
Type:C200H series PLC digital output module(Digital Output Module)
Purpose:As an extended I/O module of OMRON C200H programmable logic controller(PLC),it is used to control digital loads(such as relays,solenoid valves,indicator lights,etc.)in industrial sites,and is widely used in automation scenarios such as machinery manufacturing,packaging,food and beverage,and water treatment.
II.Technical Specifications
1.Core Functions
Output Type and Channel:
Output Signal:16-channel transistor output(Transistor Output),supports 24VDC load,maximum load current per channel 0.5A(typical value),total load current≤8A(module level).
Output Characteristics:
Response Time:≤1ms(ON/OFF switching),meeting high-speed control requirements(such as sorting machines,packaging machines).
Isolation mode:Photoelectric isolation between channels,isolation voltage≥500V(between channels/channel to ground)to avoid signal interference.
Control mode:
Supports source output(Source Output)or sink output(Sink Output)(configured by jumper or software),compatible with different load types.
Provides common terminal(COM)design to support parallel or independent control of multiple loads.
2.Hardware parameters
Interface and connection:
Terminal block:Removable spring terminal(supports live plugging and unplugging),convenient and firm wiring,suitable for frequent maintenance scenarios.
Communication interface:Connected to the PLC main control unit through the C200H bus,supports expansion to 64 I/O modules(maximum I/O points 2048 points).
Power supply requirements:24VDC(±10%),typical power consumption<2W(at full load),supports redundant power input(optional).
Protection and reliability:
Protection level:IP20(installed in the control cabinet),the shell material is flame-retardant plastic(UL94 V-0),and the electromagnetic interference(EMC)resistance complies with the IEC 61131-2 standard.
Environmental adaptability:
Operating temperature:-10℃to+55℃(standard version),-25℃to+70℃(wide temperature version optional).
Vibration resistance:complies with the IEC 60068-2-6 standard(10-500Hz,5G).
3.Performance indicators
Diagnosis and self-test:
Built-in self-diagnosis function can detect channel faults(open circuit,short circuit,overload),power supply abnormalities,and alarm through LED indicators or PLC.
Support overload protection(independent fuse or electronic protection circuit for each channel)to prevent load short circuit from damaging the module.
Safety certification:
Complies with international certifications such as CE,UL,cUL,and meets global industrial safety standards.
Optional functional safety version(such as C200H-OD219-F)supports IEC 61508 SIL 2 certification and is suitable for safety instrumented systems(SIS).
3.Application fields
Machinery manufacturing
CNC machine tool control:Control the start and stop of the spindle motor and the coolant solenoid valve through C200H-OD219 to achieve high-precision processing.
Robot sorting line:Control actuators such as cylinders and vacuum suction cups to achieve high-speed sorting and packaging.
Food and beverage
Filling line control:Control the filling valve switch and the start and stop of the conveyor belt to ensure filling accuracy and production efficiency.
Sterilization equipment:Control ultraviolet lamps and steam valves to meet food hygiene and safety requirements.
Water treatment
Pump station control:Control the start and stop of the water pump and the valve opening to realize the automated water treatment process.
Water quality monitoring:Connect water quality sensors(such as pH meters and turbidity meters)to trigger alarms or interlocking controls.
Logistics and warehousing
Automatic sorting system:Control the rollers and chute solenoid valves of the sorting machine to achieve fast sorting of packages.
Three-dimensional warehouse:control stackers and conveyor lines to optimize storage efficiency.
4.Product advantages
High density and high reliability
16-channel output:a single module integrates 16-way load control,reducing the number of hardware and wiring costs.
Photoelectric isolation design:the isolation voltage between channels is≥500V to avoid signal interference and load fault diffusion.
Flexibility and scalability
Source/sink output compatibility:through jumper or software configuration,adapt to different load types(such as PNP/NPN sensors).
C200H bus expansion:supports up to 64 I/O modules,and the system scale can be flexibly expanded.
Ease of use and maintainability
Spring terminal design:supports live plugging and unplugging,reducing maintenance downtime.
LED status indication:independent LED for each channel,quickly locate the fault point.
