描述
Phoenix Contact IL BK DIO-PLSET/SCN 12-2701004是一款高性能工业自动化数字量输入/输出模块，专为PLC系统及分布式控制场景设计，支持工业以太网通信与高可靠性信号处理。以下是其核心功能与技术参数的综合概述：
一、核心功能与定位
I/O配置
-通道数：12路数字量输入/输出（可配置为输入或输出模式）
-电压范围：支持24V DC逻辑电平，兼容电阻、电感及灯类负载。
通信能力
-支持PROFINET、EtherNet/IP等主流工业以太网协议，可无缝集成至SCADA系统及PLC网络。
-支持Modbus TCP协议，便于第三方系统数据交互。
隔离性能
-输入/输出通道与电源隔离电压达250Vrms，抗电磁干扰能力强。
-支持DIN导轨安装，防护等级IP20，适应工业现场环境。
二、技术参数
电气特性
-输入类型：光耦隔离输入，响应时间≤1ms
-输出类型：晶体管输出，每通道大负载电流0.5A（总电流≤6A）
-工作电压：24V DC（±10%）
环境适应性
-工作温度：-25℃至+70℃（存储温度：-40℃至+85℃）
-相对湿度：95%（无冷凝）
通信接口
-以太网接口：10/100Mbps自适应
-RS-485接口：支持Modbus RTU协议（可选）
三、应用场景
工业设备控制
-驱动电磁阀、继电器、指示灯等执行器，实现设备启停与状态反馈。
-监测安全门、急停按钮等输入信号，构建安全联锁系统。
分布式控制系统
-作为远程I/O站，扩展PLC系统控制范围，适用于大型生产线或分散式设备管理。
能源与过程控制
-应用于电力监测、化工流程控制，采集开关量信号并传递至主控单元。
SPHSS03
SPHSS03
Phoenix Contact IL BK DIO-PLSET/SCN 12-2701004 is a high-performance industrial automation digital input/output module designed for PLC systems and distributed control scenarios,supporting industrial Ethernet communication and high-reliability signal processing.The following is a comprehensive overview of its core functions and technical parameters:
I.Core functions and positioning
I/O configuration
-Number of channels:12 digital input/output channels(configurable as input or output mode)
-Voltage range:supports 24V DC logic level,compatible with resistors,inductors and lamp loads.
Communication capabilities
-Supports mainstream industrial Ethernet protocols such as PROFINET and EtherNet/IP,and can be seamlessly integrated into SCADA systems and PLC networks.
-Supports Modbus TCP protocol to facilitate data interaction with third-party systems.
Isolation performance
-The input/output channel and power supply isolation voltage is up to 250Vrms,with strong anti-electromagnetic interference capability.
-Supports DIN rail installation,protection level IP20,and adapts to industrial field environments.
2.Technical parameters
Electrical characteristics
-Input type:optocoupler isolation input,response time≤1ms
-Output type:transistor output,maximum load current per channel 0.5A(total current≤6A)
-Working voltage:24V DC(±10%)
Environmental adaptability
-Working temperature:-25℃to+70℃(storage temperature:-40℃to+85℃)
-Relative humidity:95%(non-condensing)
Communication interface
-Ethernet interface:10/100Mbps adaptive
-RS-485 interface:support Modbus RTU protocol(optional)
3.Application scenarios
Industrial equipment control
-Drive actuators such as solenoid valves,relays,indicator lights,etc.to realize equipment start and stop and status feedback.
-Monitor input signals such as safety doors and emergency stop buttons to build a safety interlock system.
Distributed control system
-As a remote I/O station,it expands the control range of the PLC system and is suitable for large production lines or distributed equipment management.
Energy and process control
-Applied to power monitoring and chemical process control,collecting switch signals and transmitting them to the main control unit.
