描述
oenix Contact PI C-663.10技术工控解析：工业电源模块核心组件
一、产品概述
Phoenix Contact PI C-663.10是菲尼克斯电气（Phoenix Contact）推出的工业电源模块，专为工业自动化系统设计，属于PI系列电源的核心组件。其核心功能是为PLC、传感器、执行器等设备提供高可靠性电源供应，支持双冗余输入与智能故障诊断，适用于电力、化工、轨道交通、智能制造等领域的复杂工业环境。
二、核心功能与技术特性
1.电源输出与冗余设计
双输入电压兼容：支持AC 100-240V或DC 24-48V输入，自动适应不同供电场景。
冗余电源切换：内置双电源输入通道，支持毫秒级无缝切换，确保系统持续运行。
过载与短路保护：集成OCP（过流保护）和SCP（短路保护），最大输出电流10A，适应高负载需求。
2.电气隔离与抗干扰
4000V隔离电压：输入与输出端电气隔离，防止电磁干扰（EMI）对设备造成影响。
浪涌抑制：内置TVS二极管，支持8/20μs波形浪涌电流抑制，适应恶劣工业电网环境。
3.智能监控与诊断
LED状态指示：实时显示电源状态（输入/输出电压、故障报警）。
Modbus通信接口：通过RS485接口与上位机（如HMI、SCADA）通信，提供电压、电流、温度等参数远程监控。
故障自检：支持过温、过压、欠压等异常状态检测，触发报警信号。
4.安装与兼容性
DIN导轨安装：模块尺寸120mm×65mm×80mm，重量0.5kg，适配标准工业机柜。
模块化扩展：支持与其他PI系列电源（如C-663.20）并联扩容，最大输出功率可达240W。
三、技术参数
参数规格
型号PI C-663.10
输入电压AC 100-240V或DC 24-48V
输出电压DC 24V±5%
输出电流10A
功率240W
隔离电压4000V
防护等级IP20
工作温度-25°C至70°C
通信接口RS485（Modbus RTU）
尺寸120×65×80 mm
PM36218B-10P-1-8PH-J
PM36218B-10P-1-8PH-J
Phoenix Contact PI C-663.10 Technical Industrial Control Analysis:Core Components of Industrial Power Module
1.Product Overview
Phoenix Contact PI C-663.10 is an industrial power module launched by Phoenix Contact.It is specially designed for industrial automation systems and is a core component of the PI series power supply.Its core function is to provide high-reliability power supply for PLC,sensor,actuator and other equipment,support dual redundant input and intelligent fault diagnosis,and is suitable for complex industrial environments in the fields of electricity,chemical industry,rail transit,intelligent manufacturing,etc.
2.Core functions and technical characteristics
1.Power output and redundant design
Dual input voltage compatible:supports AC 100-240V or DC 24-48V inputs,automatically adapting to different power supply scenarios.
Redundant power switch:Built-in dual power input channels,supports seamless millisecond switching to ensure continuous operation of the system.
Overload and short circuit protection:Integrated OCP(overcurrent protection)and SCP(short circuit protection),maximum output current of 10A,adapting to high load requirements.
2.Electrical isolation and anti-interference
4000V Isolation voltage:The input is electrically isolated from the output to prevent electromagnetic interference(EMI)from affecting the equipment.
Surge suppression:Built-in TVS diode,supports 8/20μs waveform surge current suppression,adapting to harsh industrial grid environments.
3.Intelligent monitoring and diagnosis
LED status indicator:Display the power status(input/output voltage,fault alarm)in real time.
Modbus communication interface:communicates with the host computer(such as HMI,SCADA)through the RS485 interface,providing remote monitoring of voltage,current,temperature and other parameters.
Fault self-test:supports detection of abnormal states such as over-temperature,over-voltage,and under-voltage,triggering alarm signals.
4.Installation and compatibility
DIN rail installation:module size 120mm×65mm×80mm,weight 0.5kg,suitable for standard industrial cabinets.
Modular expansion:Supports parallel expansion with other PI series power supplies(such as C-663.20),with a maximum output power of up to 240W.
3.Technical parameters
Parameters Specifications
Model PI C-663.10
Input voltage AC 100-240V or DC 24-48V
Output voltage DC 24V±5%
Output current 10A
Power 240W
Isolation voltage 4000V
Protection level IP20
Operating temperature-25°C to 70°C
Communication interface RS485(Modbus RTU)
Size 120×65×80 mm
