REXROTH SL36

存储与处理能力

-内存:64MB SDRAM,8MB Data Flash+64MB NAND Flash(可扩展至128MB)。

-时钟与复位:RTC实时时钟(带锂电池掉电保护)、可配置看门狗及手动复位电路。

通信与接口

-以太网:10/100Mbps自适应,板载PHY芯片。

-串口:3个CPU内置UART+4个扩展UART(含DEBUG接口)。

-工业总线:1路CAN总线(支持CAN2.0A/B协议)。

-USB:2路HOST(USB2.0)+1路DEVICE(全速)。

-扩展接口:PC104标准接口、GPIO、CF卡接口(支持8G存储)。

电源与功耗

-供电:5V DC,低功耗设计。

描述

REXROTH SL36是一款高性能嵌入式核心模块,专为工业控制、危险环境监测及自动化系统设计,具备高集成度、低功耗及强抗干扰能力。以下是其核心功能与技术参数的综合解析:

一、产品概述

REXROTH SL36基于ATMEL AT91SAM9263工业级处理器(ARM926EJ-S内核,200MHz主频),采用标准90mm×96mm PC104架构,支持丰富的I/O扩展功能。其设计目标是为工业型数据采集、电力监测、通信设备等场景提供紧凑高效的解决方案。

二、硬件特性

存储与处理能力

-内存:64MB SDRAM,8MB Data Flash+64MB NAND Flash(可扩展至128MB)。

-时钟与复位:RTC实时时钟(带锂电池掉电保护)、可配置看门狗及手动复位电路。

通信与接口

-以太网:10/100Mbps自适应,板载PHY芯片。

-串口:3个CPU内置UART+4个扩展UART(含DEBUG接口)。

-工业总线:1路CAN总线(支持CAN2.0A/B协议)。

-USB:2路HOST(USB2.0)+1路DEVICE(全速)。

-扩展接口:PC104标准接口、GPIO、CF卡接口(支持8G存储)。

电源与功耗

-供电:5V DC,低功耗设计。

三、应用领域

工业控制与自动化

-模块化PLC、人机界面(HMI)、变频器监测与控制。

-电力系统数据采集、环境参数监测。

危险环境监测

-适用于化工、海上钻井平台、冶金等1区/2区爆炸性气体环境(IIA/IIB/IIC类,T1-T4组别)。

-防护等级IP55,抗电磁干扰设计。

能源与船舶工程

-船舶推进系统、舵机控制、发动机管理系统。

四、设计优势

高集成度与灵活性

-紧凑尺寸内集成处理器、存储、通信模块及扩展接口,支持快速系统集成。

可靠性与稳定性

-工业级处理器与内存选型,支持宽温工作(-40℃至+85℃)。

-看门狗与掉电保护机制确保系统异常时自动恢复。

MVME167-33B

MVME167-33B

MVME167-33B

MVME167-33B

REXROTH SL36 is a high-performance embedded core module designed for industrial control,hazardous environment monitoring and automation systems.It has high integration,low power consumption and strong anti-interference ability.The following is a comprehensive analysis of its core functions and technical parameters:

I.Product Overview

REXROTH SL36 is based on the ATMEL AT91SAM9263 industrial-grade processor(ARM926EJ-S core,200MHz main frequency),adopts the standard 90mm×96mm PC104 architecture,and supports rich I/O expansion functions.Its design goal is to provide compact and efficient solutions for industrial data acquisition,power monitoring,communication equipment and other scenarios.

II.Hardware Features

Storage and processing capabilities

-Memory:64MB SDRAM,8MB Data Flash+64MB NAND Flash(expandable to 128MB).

-Clock and reset:RTC real-time clock(with lithium battery power-off protection),configurable watchdog and manual reset circuit.

Communication and interface

-Ethernet:10/100Mbps adaptive,onboard PHY chip.

-Serial port:3 CPU built-in UART+4 extended UART(including DEBUG interface).

-Industrial bus:1 CAN bus(support CAN2.0A/B protocol).

-USB:2 HOST(USB2.0)+1 DEVICE(full speed).

-Expansion interface:PC104 standard interface,GPIO,CF card interface(support 8G storage).

Power supply and power consumption

-Power supply:5V DC,low power design.

III.Application field

Industrial control and automation

-Modular PLC,human-machine interface(HMI),inverter monitoring and control.

-Power system data acquisition,environmental parameter monitoring.

Hazardous environment monitoring

-Applicable to explosive gas environments in Zone 1/Zone 2(IIA/IIB/IIC,T1-T4 groups)such as chemical industry,offshore drilling platforms,and metallurgy.

-Protection level IP55,anti-electromagnetic interference design.

Energy and Marine Engineering

-Marine propulsion systems,steering gear control,engine management systems.

IV.Design advantages

High integration and flexibility

-Processors,storage,communication modules and expansion interfaces are integrated in a compact size to support rapid system integration.

Reliability and stability

-Industrial-grade processor and memory selection,supporting wide temperature operation(-40℃to+85℃).

-Watchdog and power-off protection mechanisms ensure automatic recovery when the system is abnormal.