描述
ROCKWELL AUTOMATION 56AMXN是一款用于ControlLogix系统的远程I/O通信接口模块，主要用于AutoMax DCSNet和远程I/O网络的连接与数据传输。以下是其核心功能、技术特性及应用要点的综合分析：
一、硬件组件与功能
标识与显示
-模块表面标有”AutoMax DCSNet扫描仪”和”远程I/O”标签，明确其功能定位。
-配备4个字符的滚动显示屏（显示内容如”XXXX”或错误信息），用于状态提示。
指示灯与开关
-3个LED指示灯：
-NET：显示网络状态（如连接正常或断开）。
-CLX：指示与ControlLogix处理器的通信状态。
-OK：反映模块内部运行状态（如正常或故障）。
-顶部拨码开关：用于设置网络类型（DCS/远程I/O）、下拉编号（1-63）和下拉深度（1-5），错误设置会导致”指轮测试模式”（显示当前开关配置）。
接口与连接
-9针D型连接器：用于连接同轴网络电缆（如RG-59/U或RG-11/U）。
-电源兼容性：支持ControlLogix机箱的任意插槽安装，需确保电源版本为O-57677-1及以上（支持热插拔）。
二、网络配置与布线要求
网络类型设置
-DCS模式：需配置下拉编号（1-63）和下拉深度（1-5），组合无效时（如编号超过最大值）会触发错误提示。
-远程I/O模式：需使用特定电缆（如612574-36R降压电缆）和无源分路器（57C380），网络终端需配置75Ω负载。
布线规范
-同轴电缆需符合75Ω阻抗标准，网络两端各需一个终端器。
-降压电缆（如612574-36R）需配备铁氧体滤波器以减少EMI干扰。
PM856AK01 3BSE066490R1
ROCKWELL AUTOMATION 56AMXN is a remote I/O communication interface module for ControlLogix system,mainly used for connection and data transmission of AutoMax DCSNet and remote I/O network.The following is a comprehensive analysis of its core functions,technical features and application points:
I.Hardware components and functions
Identification and display
-The module surface is marked with”AutoMax DCSNet Scanner”and”Remote I/O”labels to clarify its functional positioning.
-Equipped with a 4-character scrolling display(display content such as”XXXX”or error information)for status prompts.
Indicator lights and switches
-3 LED indicators:
-NET:Displays network status(such as normal connection or disconnection).
-CLX:Indicates the communication status with the ControlLogix processor.
-OK:Reflects the internal operating status of the module(such as normal or faulty).
-Top DIP switch:used to set the network type(DCS/remote I/O),pull-down number(1-63)and pull-down depth(1-5).Incorrect settings will result in”thumbnail test mode”(displaying the current switch configuration).
Interface and connection
-9-pin D-type connector:used to connect coaxial network cables(such as RG-59/U or RG-11/U).
-Power supply compatibility:supports installation in any slot of the ControlLogix chassis.Make sure that the power supply version is O-57677-1 and above(supports hot plugging).
2.Network configuration and wiring requirements
Network type setting
-DCS mode:The pull-down number(1-63)and pull-down depth(1-5)need to be configured.An error prompt will be triggered when the combination is invalid(such as the number exceeds the maximum value).
-Remote I/O mode:Specific cables(such as 612574-36R step-down cable)and passive splitters(57C380)are required,and the network termination needs to be configured with a 75Ωload.
Wiring specifications
-Coaxial cable must meet the 75Ωimpedance standard,and a terminator is required at both ends of the network.
-Step-down cables(such as 612574-36R)need to be equipped with ferrite filters to reduce EMI interference.
GE VMIVME-7698-345 350-017698-345 B GE IC698CPE040 EMERSON MVME55006E-0163 AUTOMAX 57C552-1 MOOG D136-001-007 MOOG D136-001-007 ENI GHW-12Z ABB PFCL201C 10KN GE IC698CRE040 EMERSON MVME7100 XYCOM XVME-653 ABB PM511V16 ABB PPD113 GE IC698CPE030 woodward 8200-1302 MOOG D136-001-007 WOODWARD 9907-1183 ABB 5SHX2645L0002/3HB012961R0001 ABB 3BHB021400R0002 5SHY4045L0004 ABB 5SHY4045L0004 MOOG D136-001-007 ZYGO ZMI2002 FANUC A06B-6150-H100 ABB 129740-002 GE VMIVME-7750 MOOG D136-001-007 MOOG D136-001-007 MKS RPS AX7695 MOOG D136-001-007 GE IS200VCMIH2BEE GE IS200BPVCG1BR1 TRICONEX 3009 MOOG D136-001-007 MOOG D136-001-007 INDRAMAT 2AD160B-B350R2-BS03-D2N1 INDRAMAT 2AD160B-B35OR2-BS03-D2V1 ABB KUC755AE106 HONEYWELL FC-QPP-0002 ABB DSDP140B 57160001-ACX ABB DSDP140B 57160001-ACX MOOG D136-001-007 WOODWARD 8237-1246 ABB 57160001-ACX GE V7768-31200 MOOG D136-001-007 MOOG D136-001-007 MOOG D136-001-007 MOOG D136-001-007 MOOG D136-001-007 ABB HIEE205011R0002 ABB PM866A 3BSE076359 YASKAWA CIMR-HB4A0450ABC MOTOROLA MVME5500 MOOG D136-001-007 MOOG D136-001-007 Tektronix DPO5054B ABB SPHSS13 ABB MPRC086444-005 MOOG D136-001-007 MOOG D136-001-007 GE VMIVME-7807 GE VMIVME-7807 GE VMIVME-7807RC GE VMIVME-7807 GE IS215UCVEM06A GE IS215UCVEM06A ABB PPD113B01-10-150000 TRICONEX 3009 GE IS215UCVEH2A ABB PM866K01 ABB PFTL 101B 2.0KN ABB PP865A GE VMIVME-7750 A-B 20BC205A0AYNANC0 Rexroth DKC01.3-200-7-FW（配套制动电阻） ABB 3HAC029818-001/10 DSQC663 ABB 3HAC029818-001 DSQC663 ABB PM511V16 GE IC698CPE040-FJ Acquisition AL81G Acquisition AL81G Acquisition AL81G Acquisition AL81G MOOG D136-001-007 VMIC VMIVME7740-841 ABB KUC755AE105 VMIC VME7740-841 VMI VME7740-841 VMIC VME7740-841 ABB PM866AK01 ABB KUC755AE117 ABB PFSK151 GE IC698CPE040 woodward 5466-409 SIEMENS 6ES7416-3ES06-0AB0 FOXBORO P0973KJ ABB 3BHB005243R0105 GE IS220PSVOH1A HIMA F8650X ABB 800PP846A UNIOP ETT-VGA-0045 UNIOP ETT-VGA ABB PP846 GE IS200TRPGH1B ICS TRIPLEX T8451C ABB PFTL101A 0.5KN ABB PFTL101A 1.0KN ICS TRIPLEX T8110B UNIOP ETT-VGA-0045 ABB PM511V08 ABB PP846A ICS T8110B ABB 3BSE004160R1 PFTL101A GE DS200LDCCH1ALA ABB PM866K01 HIMA F8650X ABB 5SHY35L4520 YASKAWA CIMR-HB4A0370ABC A-B 8720MC-RPS190BM UNIOP ETT-VGA-0045 GE VMIVME-7807 ABB PU519 3BSE018681R1 FANUC A06B-6091-H175 Agilent HP 5517B GE VME-7807RC GE VME-7807RC GE VMIVME-7807 ICS TRIPLEX(ROCKWELL) T8480 GE VME-7807RC ABB PFTL 101B 2.0KN SCHNEIDER 140CPU67861 A-B 1756-L84ES GE IS200VSVOH1BED WOODWARD 9907-164 ABB PM866 ELAU MAX-4/11/03/128/99/1/1/00 GE VMIVME-7807 ABB PM864AK01 GE VME-7807RC ABB PM864A ABB PM864A ABB PU516 A-B 1326AB-B720F-S2K7L ZYGO ZMI-2002 TRICONEX PI3381 GE VMIVME-7750 ICSTRIPLEX T8110B ICS TRIPLEX T8110B GE IS215UCVEM09B ABB 5SHY3545L0020 Motorola VME172PA-652SE-2G KROHNE OPTISONIC6300 ABB 800PP846A ABB PP846A GE IS200TREGH1BDC MOTOROLA VME172PA652SE ABB 3HNA024871-001 TRICONEX 3721 ABB PM511V08 JOHNSON MS-NAE5510-3 Johnson MS-NAE5510-3 HIMA ELOP II GE IS200VCRCH1B GE IC800SSI216RD2 TRICONEX 3721 REXROTH KSM01.2B-071C-35N-M1-HP0-SE-NN-FW Parker Abex 425-1607 MOTOROLA MVME5500-0161 PANALARM 90P18X6D1C4D ICS TRIPLEX T8110B ENTERASYS/FOXBORO A2H124-24FX TRICONEX EPI3382 Motorola VME172PA652SE GE IC697CPM790 ABB 5SHY3545L0020 ABB 5SHY5045L0020 ELAU PMC-2/11/25/001/00/03/00/0K ABB EL3020 CABLETRON SYSTEM MINIMMAC WITH LANVIEW
