描述
一、核心功能与定位
产品类型
功能：工业控制板，专为TERADYNE测试设备设计，用于设备运行的控制与管理，支持多协议通信、自定义配置及实时监控。
兼容性：适配TERADYNE系列测试系统，兼容多种工业设备与系统，适用于半导体、电子制造等领域的测试与质量控制。
核心特性
控制与监控：集成先进算法，支持设备状态实时监测、故障诊断及参数调整。
可扩展性：通过模块化设计支持功能扩展，适配不同测试场景需求。
耐用性：采用工业级材料，适应恶劣环境（如高温、高湿度）。
二、技术参数
硬件配置
输入/输出接口：
二进制输入：4个标准输入，支持“倒置”或“非倒置”模式配置。
输出触点：6个输出触点（2个电源输出+4个信号输出），可配置为保护启动/跳闸、外部控制等信号。
通信协议：支持PROFINET、EtherNet/IP、MODBUS等工业协议，兼容DCS系统。
软件功能
LHMI菜单：支持用户自定义配置二进制输入/输出映射，实现功能快速调整。
多值计算：支持多CPU协同运行，提升复杂任务处理效率（如开环控制与数据共享）。
环境适应性
工作温度：-20°C至+60°C（部分型号扩展至-40°C至+85°C）。
防护等级：IP20（室内安装），抗电磁干扰（符合EN 55032 Class B）。
三、功能特性
控制与保护
设备管理：支持设备启停、参数调节及故障复位，如断路器位置监控、跳闸电路状态反馈。
安全机制：内置过流、短路保护功能，支持紧急停机与报警信号输出。
通信与扩展
网络架构：支持集中式扩展（多机架互联）或分布式配置（如ET200拓扑），适配大规模系统集成。
高速总线：集成高速通讯背板总线，支持多任务并行处理（如HMI通信、运动控制、I/O采集）。
诊断与维护
实时监测：通过LHMI菜单查看设备状态、信号质量及故障代码。
热插拔设计：支持信号模块在线更换，减少停机时间。
1.Core functions and positioning
Product Type
Function:Industrial control board,specially designed for TERADYNE test equipment,is used for the control and management of device operation,supports multi-protocol communication,custom configuration and real-time monitoring.
Compatibility:It is suitable for TERADYNE series testing systems,compatible with a variety of industrial equipment and systems,and is suitable for testing and quality control in semiconductors,electronic manufacturing and other fields.
Core features
Control and monitoring:Integrate advanced algorithms to support real-time monitoring of equipment status,fault diagnosis and parameter adjustment.
Scalability:Supports functional expansion through modular design,adapting to the needs of different test scenarios.
Durability:Use industrial grade materials to adapt to harsh environments(such as high temperature and high humidity).
2.Technical parameters
Hardware configuration
Input/output interface:
Binary input:4 standard inputs,support for”inverted”or”non-inverted”mode configuration.
Output contacts:6 output contacts(2 power outputs+4 signal outputs),which can be configured to protect start/trip,external control and other signals.
Communication protocol:Supports industrial protocols such as PROFINET,EtherNet/IP,MODBUS,etc.,and is compatible with DCS systems.
Software features
LHMI menu:Supports user-defined configuration of binary input/output mapping to achieve rapid function adjustment.
Multi-value calculation:supports collaborative operation of multiple CPUs to improve the efficiency of complex tasks(such as open-loop control and data sharing).
Environmental adaptability
Operating temperature:-20°C to+60°C(some models are extended to-40°C to+85°C).
Protection level:IP20(indoor installation),anti-electromagnetic interference(compliant with EN 55032 Class B).
3.Functional characteristics
Control and protection
Equipment management:Supports equipment start and stop,parameter adjustment and fault reset,such as circuit breaker position monitoring and trip circuit status feedback.
Safety mechanism:Built-in overcurrent and short circuit protection functions,supporting emergency shutdown and alarm signal output.
Communication and Extension
Network architecture:Supports centralized expansion(multi-rack interconnection)or distributed configurations(such as ET200 topology),adapted to large-scale system integration.
High-speed bus:Integrated high-speed communication backplane bus,supporting multi-task parallel processing(such as HMI communication,motion control,I/O acquisition).
Diagnosis and maintenance
Real-time monitoring:View device status,signal quality and fault code through the LHMI menu.
Hot-swap design:supports online replacement of signal modules to reduce downtime.
