描述
一、产品概述
TRICON 9651-110是TRICONEX（英维思）推出的数字输出模块，属于其安全仪表系统（SIS）产品线，专为工业自动化中的高可靠性控制设计。该模块采用三重模件冗余（TMR）架构，支持安全关键应用（如紧急停机、火灾与气体监测），并具备宽温域适应性和抗干扰能力。
二、核心功能与特点
数字输出能力
提供16个独立数字输出通道，支持开关量输出（如控制阀门、启动/停止设备）或模拟量输出（需配置）。
输出电压：24V DC，最大电流2A，负载电阻100Ω，适用于工业设备的直接控制。
冗余与可靠性
采用HIFT TMR冗余设计，通过三重模件同步运行和投票机制，确保单模块故障时系统仍正常运行。
MTBF（平均无故障时间）超过10万小时，满足安全完整性等级（SIL）要求。
抗干扰与防护
光隔离技术：隔离控制器与负载之间的电气干扰，兼容工业环境中的电磁噪声。
环境适应性：工作温度范围-40°C至70°C，湿度20%-95%（非冷凝），适用于恶劣工业场景。
诊断与维护
内置实时硬件故障检测功能，支持状态监控和故障分析，简化维护流程。
支持在线模块更换，确保系统连续运行。
三、技术参数
参数类别具体规格
输出通道16个数字输出（开关量或模拟量）
输出电压24V DC
输出电流2A（每通道）
负载电阻100Ω
隔离电压3000V（光隔离）
抗干扰能力60V/µs（共模抑制比-85dB）
工作温度-40°C至70°C
湿度范围20%-95%（非冷凝）
防护等级IP54（工业级防护）
通信接口支持TRICONEX SIS控制器的编程软件配置
3703E
3700
1.Product Overview
TRICON 9651-110 is a digital output module launched by TRICONEX.It belongs to its safety instrumentation system(SIS)product line and is designed for high reliability control in industrial automation.The module adopts a triple module redundancy(TMR)architecture,supports safety-critical applications such as emergency shutdown,fire and gas monitoring,and has wide temperature range adaptability and anti-interference capabilities.
2.Core functions and features
Digital output capability
Provides 16 independent digital output channels,supporting switching outputs(such as control valves,start/stop equipment)or analog outputs(configuration required).
Output voltage:24V DC,maximum current 2A,load resistance 100Ω,suitable for direct control of industrial equipment.
Redundancy and reliability
The HIFT TMR redundant design is adopted,and the triple module synchronous operation and voting mechanism is used to ensure that the system still operates normally when a single module fails.
MTBF(Average No Failure Time)More than 100,000 hours,meeting the Safety Integrity Level(SIL)requirements.
Anti-interference and protection
Optical isolation technology:isolates electrical interference between the controller and the load,compatible with electromagnetic noise in industrial environments.
Environmental adaptability:Operating temperature range-40°C to 70°C,humidity 20%-95%(non-condensing),suitable for harsh industrial scenarios.
Diagnosis and maintenance
Built-in real-time hardware fault detection function,supports status monitoring and fault analysis,and simplifies maintenance process.
Supports online module replacement to ensure continuous operation of the system.
3.Technical parameters
Parameter category Specific specifications
Output channel 16 digital outputs(switching or analog)
Output voltage 24V DC
Output current 2A(per channel)
Load resistance 100Ω
Isolation voltage 3000V(optical isolation)
Anti-interference capability:60V/µs(common mode rejection ratio-85dB)
Operating temperature-40°C to 70°C
Humidity range 20%-95%(non-condensing)
Protection level IP54(industrial protection)
Communication interface Supports programming software configuration of TRICONEX SIS controller
