描述
TRICONEX DI3301是Triconex安全控制系统中的数字输入模块，专为高安全性和高可靠性工业场景设计，适用于化工、石油、电力、天然气等关键领域。其核心特点包括三重冗余（TMR）架构、实时诊断功能及SIL3安全认证。
技术参数
输入规格
输入点数：32点（每通道独立隔离）
输入类型：干接点、有源输入（DC信号）
输入电压范围：0–32 VDC
隔离电压：500 VDC
冗余设计
三重冗余（TMR）：每个输入点由三路独立通道采集数据，通过表决机制确保数据可靠性。
热插拔支持：支持在线更换模块，不影响系统运行。
通信与协议
通信方式：与Tricon主处理器通过I/O总线通信，支持TriStation、Modbus、TCP/IP等协议。
网络端口：2个网络端口，支持IP多播和嵌入式OPC服务。
环境适应性
工作温度：0°C至+60°C
存储温度：-40°C至+85°C
防护等级：IP20（需安装于控制柜内）
核心功能特点
高安全性
SIL3认证：符合功能安全标准，适用于紧急停车（ESD）、火气系统（F&G）等安全关键场景。
实时诊断：持续监测输入通道状态，检测开路、短路、过压等故障，并触发系统警报。
智能处理
通道级诊断：独立检测每个输入通道的健康状态，而非仅模块整体。
自适应修复：自动验证输入信号状态切换能力，确保系统容错性。
模块化扩展
兼容基板：支持2301型、外部终端基板（适用于高压或危险场所）。
远程I/O：支持距离主机架12公里内的远程I/O模块扩展。
工业级可靠性
抗干扰设计：通道隔离防止现场干扰，符合IEC/EN61000电磁兼容标准。
抗震性：适应工业环境振动、湿度等严苛条件。
典型应用场景
安全仪表系统（SIS）
监测紧急停机信号、火气报警、压力/温度超限等安全相关状态。
过程控制
采集设备启停、阀门开关、传感器状态等开关量信号。
自动化生产线
监控生产线设备运行状态，确保生产安全与效率。
能源与电力
应用于发电厂、变电站的保护系统，如断路器状态检测。
技术优势
高容错性：三重冗余设计确保单点故障不影响系统运行。
快速响应：支持毫秒级信号处理，满足实时控制需求。
灵活配置：兼容多种输入类型与电压范围，适配复杂工业场景。
低维护成本：热插拔功能减少停机时间，诊断功能简化故障排查。
8310
3624
TRICONEX DI3301 is a digital input module in Triconex safety control system.It is designed for high safety and high reliability industrial scenarios and is suitable for key areas such as chemicals,oil,electricity,and natural gas.Its core features include triple redundancy(TMR)architecture,real-time diagnostic functions and SIL3 security certification.
Technical parameters
Enter specifications
Number of input points:32 points(independently isolated for each channel)
Input type:dry contact,active input(DC signal)
Input voltage range:0–32 VDC
Isolation voltage:500 VDC
Redundant design
Triple Redundancy(TMR):Each input point is collected by three independent channels,and data reliability is ensured through a voting mechanism.
Hot-swap support:supports online replacement of modules and does not affect system operation.
Communication and Protocol
Communication method:Communication with the Tricon main processor through the I/O bus,supporting protocols such as TriStation,Modbus,TCP/IP.
Network port:2 network ports,supports IP multicast and embedded OPC services.
Environmental adaptability
Operating temperature:0°C to+60°C
Storage temperature:-40°C to+85°C
Protection level:IP20(need to be installed in the control cabinet)
Core functional features
High security
SIL3 certification:Complies with functional safety standards and is suitable for safety-critical scenarios such as emergency parking(ESD),fire gas systems(F&G).
Real-time diagnostics:Continuously monitor the status of the input channel,detect open circuit,short circuit,overvoltage and other faults,and trigger system alarms.
Intelligent processing
Channel-level diagnostics:Independently detect the health status of each input channel,rather than just the module as a whole.
Adaptive repair:Automatically verify the input signal status switching capability to ensure system fault tolerance.
Modular extension
Compatible substrate:Supports 2301 type,external terminal substrate(suitable for high-voltage or hazardous places).
Remote I/O:Supports remote I/O module expansion within 12 kilometers of the main rack.
Industrial-grade reliability
Anti-interference design:Channel isolation prevents field interference and complies with IEC/EN61000 electromagnetic compatibility standards.
Seismic resistance:adapts to harsh conditions such as vibration and humidity in the industrial environment.
Typical application scenarios
Safety Instrument System(SIS)
Monitor emergency shutdown signals,fire alarms,pressure/temperature exceeding limits and other safety-related statuses.
Process control
Collect switch signals such as equipment start and stop,valve switch,sensor status,etc.
Automated production line
Monitor the operating status of production line equipment to ensure production safety and efficiency.
Energy and Electricity
It is used in protection systems for power plants and substations,such as circuit breaker status detection.
Technical Advantages
High fault tolerance:triple redundant design ensures that single point of failure does not affect system operation.
Quick response:supports millisecond signal processing to meet real-time control needs.
Flexible configuration:compatible with multiple input types and voltage ranges,adapted to complex industrial scenarios.
Low maintenance cost:Hot-swap function reduces downtime,and diagnostic function simplifies troubleshooting.
