描述
一、核心功能与定位
产品类型
功能：工业继电器输出底座，专为WESTINGHOUSE继电器模块设计，提供电气连接与安装接口，支持信号传输与设备控制。
兼容性：与西屋（WESTINGHOUSE）品牌的继电器模块兼容，适用于工业自动化系统的开关量输出控制。
核心特性
高可靠性：采用高品质材料（如铸铁）和制造工艺，确保长期稳定运行。
易安装性：标准化设计，支持快速安装与维护，兼容工业导轨或面板固定方式。
电气安全性：提供可靠的电气接触，支持隔离接地设计，降低短路或干扰风险。
二、技术参数
硬件规格
材质：铸铁（部分描述为其他材质，需以实际型号为准）。
安装形式：支持导轨式或面板式安装，具体尺寸未明确标注。
防护等级：未直接提及，但工业应用场景通常需满足IP20或更高防护标准。
电气性能
公称压力：部分资料提及1MPa（可能为其他型号参数，需验证）。
适用温度：3℃（可能为特定场景下的测试条件，非工作温度范围）。
信号类型：支持开关量输出，适用于继电器控制信号的传输。
三、功能特性
接口设计
电气连接：提供标准化接口，确保继电器模块与控制系统（如PLC、DCS）的可靠通信。
扩展性：支持多通道输出，可扩展至多个设备或传感器。
环境适应性
工业级耐受：适应恶劣工业环境（如高温、高湿、粉尘），部分型号可能支持IP65防护。
维护与诊断
模块化设计：便于更换故障部件，减少停机时间。
状态监测：部分型号可能集成LED指示灯，显示运行状态或故障报警。
1C31222G01
1C31222G01
1.Core functions and positioning
Product Type
Function:Industrial relay output base,specially designed for WESTINGHOUSE relay module,provides electrical connection and installation interface,and supports signal transmission and equipment control.
Compatibility:Compatible with WestingHOUSE brand relay modules,suitable for switching output control of industrial automation systems.
Core features
High reliability:Use high-quality materials(such as cast iron)and manufacturing processes to ensure long-term and stable operation.
Easy to install:Standardized design,supports rapid installation and maintenance,compatible with industrial rails or panel fixing methods.
Electrical Safety:Provides reliable electrical contact,supports isolated grounding design,and reduces the risk of short circuit or interference.
2.Technical parameters
Hardware specifications
Material:Cast iron(partially described as other materials,the actual model shall prevail).
Installation form:Supports rail-type or panel-type installation,and the specific dimensions are not clearly marked.
Protection level:Not directly mentioned,but industrial application scenarios usually need to meet IP20 or higher protection standards.
Electrical performance
Nominal pressure:Some data mention 1MPa(may be other model parameters,and need to be verified).
Applicable temperature:3℃(may be the test conditions in specific scenarios,non-operating temperature range).
Signal type:Supports switching output,suitable for the transmission of relay control signals.
3.Functional characteristics
Interface design
Electrical connection:Provides standardized interfaces to ensure reliable communication between relay modules and control systems(such as PLCs,DCS).
Scalability:Supports multi-channel output,can be expanded to multiple devices or sensors.
Environmental adaptability
Industrial-grade tolerance:adapts to harsh industrial environments(such as high temperature,high humidity,dust),some models may support IP65 protection.
Maintenance and diagnosis
Modular design:Easy to replace faulty parts and reduce downtime.
Status monitoring:Some models may integrate LED indicators to display operating status or fault alarms.
